ZSSC3154 Datasheet, PDF (2/28 Pages) List of Unclassifed Manufacturers – Automotive Sensor Signal Conditioner with Dual Analog Output

Automotive Sensor Signal
Conditioner with Dual Analog Output
ZSSC3154
Datasheet
ZSSC3154 Block Diagram
External
Temperature
Sensor 2
External
Temperature
Sensor 1
Temperature
Sensor Select
Gain
Factor
Offset
Shift
ADC
Mode
Sensor
Bridge
MUX
Internal
Temperature
Sensor
PGA
ADC
Analog Front-End AFE
Conditioning Calculation
Conditioning Formula
Conditioning Coefficients
EEPROM
RAM
CMC
ROM
I²C™*
I²C™*
Diagnostic Fault
Band Mode
DAC
BAMP
BAMP
ZACwire™
AOUT2
AOUT1
OWI
(Digital
Data IO)
Digital Core
Interfaces
* I²C™ is a trademark of NXP.
Ordering Information
Product Sales Code Description
ZSSC3154BA1B
ZSSC3154 Die – Temperature Range -40 to 125°C
ZSSC3154BA1C
ZSSC3154 Die – Temperature Range -40 to 125°C
ZSSC3154BA3R
ZSSC3154 QFN32 (5x5 mm; wettable flank) – Temperature Range -40 to 125 °C
ZSSC3154BE3R
ZSSC3154 QFN32 (5x5 mm; wettable flank) – Temperature Range -40 to 150 °C
ZSSC3154KIT
ZSSC3154 SSC Evaluation Kit: Communication Board, SSC Board, Sensor
Replacement Board, 5 QFN32 samples (software can be downloaded from the
product page www.IDT.com/ZSSC3154)
Package
Wafer
Sawn on frame
Reel
Reel
Kit
Corporate Headquarters
6024 Silver Creek Valley Road
San Jose, CA 95138
www.IDT.com
Sales
1-800-345-7015 or 408-284-8200
Fax: [phone]
www.IDT.com/go/sales
Tech Support
www.IDT.com/go/support
DISCLAIMER Integrated Device Technology, Inc. (IDT) reserves the right to modify the products and/or specifications described herein at any time, without notice, at IDT's sole discretion. Performance
specifications and operating parameters of the described products are determined in an independent state and are not guaranteed to perform the same way when installed in customer products. The
information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT's products for any particular purpose, an
implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property
rights of IDT or any third parties.
IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be
reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.
Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the
property of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. All contents of this document are copyright of Integrated
Device Technology, Inc. All rights reserved.
© 2016 Integrated Device Technology, Inc.
2
January 22, 2016