IDT72V70210 Datasheet, PDF (14/19 Pages) Integrated Device Technology – 3.3 VOLT TIME SLOT INTERCHANGE DIGITAL SWITCH 1,024 x 1,024

IDT72V70210 3.3V TIME SLOT INTERCHANGE
DIGITAL SWITCH 1,024 x 1,024
COMMERCIAL TEMPERATURE RANGE
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
RECOMMENDED OPERATING
Symbol Parameter
Min.
Max. Unit ^{CONDITIONS(1)}
VCC Supply Voltage
3.0
3.6
V
Symbol
Parameter
Min. Typ. Max. Unit
Vi
Voltage on Digital Inputs
GND -0.3
5.3
V
VCC
Positive Supply
3.0 3.3 3.6 V
IO
Current at Digital Outputs
-50
50
mA
VIH
Input HIGH Voltage
2.0
 5.3
V
TS
Storage Temperature
-55
+125
°C
VIL
Input LOW Voltage

 0.8
V
PD Package Power Dissapation

2
W
TOP
Operating Temperature
-40
25 +85 °C
Commercial
NOTE:
NOTE:
1. Exceeding these values may cause permanent damage. Functional operation under _{1.Voltages are with respect to Ground unless otherwise stated.}
these conditions is not implied.
DC ELECTRICAL CHARACTERISTICS
Symbol
ICC ⁽²⁾
IIL^(3,4)
IOZ^(3,4)
VOH⁽⁵⁾
VOL⁽⁶⁾
Parameter
Supply Current @ 2 Mb/s
Input Leakage (input pins)
High-impedance Leakage
Output HIGH Voltage
Output LOW Voltage
Min.
Typ.
Max.
Units
-
15
20
mA
-
-
50
µA
-
-
50
µA
2.4
-
-
V
-
-
0.4
V
NOTES:
1. Voltages are with respect to ground (GND) unless otherwise stated.
2. Outputs unloaded.
3. 0 ≤ V ≤ VCC.
4. Maximum leakage on pins (output or I/O pins in high-impedance state) is over an
5. IOH = 10 mA.
6. IOL = 10 mA.
applied voltage (V).
AC ELECTRICAL CHARACTERISTICS - TIMING PARAMETER
MEASUREMENT VOLTAGE LEVELS
Symbol Rating
Level Unit
VTT TTLThreshold
1.5 V
VHM TTL Rise/Fall Threshold Voltage HIGH
2.0 V
VLM TTLRise/FallThresholdVoltageLOW
0.8 V
Output
Pin
Test Point
RL
S1
CL
GND
Figure 3. Output Load
VCC
S2
GND
5714 drw06
S1 is open circuit except when testing output
levels or high impedance states.
S2 is switched to VCC or GND when testing
output levels or high impedance states.
14