5P49V5901 Datasheet, PDF (14/37 Pages) Integrated Device Technology – Generates up to four independent output frequencies

5P49V5901 DATASHEET
Table 13:Electrical Characteristics – Differential Clock Input Parameters ^1,2 (Supply
Voltage V_DDA, V_DDD, V_DDO0 = 3.3V ±5%, 2.5V ±5%, 1.8V ±5%, TA = -40°C to +85°C)
Symbol Parameter
Test Conditions
Min
Typ
VIH
Input High Voltage - CLKIN, CLKINBSingle-ended input
0.55
VIL
Input Low Voltage - CLKIN, CLKINB Single-ended input
GND - 0.3
VSWING Input Amplitude - CLKIN, CLKINB Peak to Peak value, single-ended
200
dv/dt
Input Slew Rate - CLKIN, CLKINB Measured differentially
0.4
IIL
Input Leakage Low Current
VIN = GND
-5
IIH
Input Leakage High Current
VIN = 1.7V
dTIN
Input Duty Cycle
Measurement from differential waveform
45
Max
1.7
0.4
1200
8
5
20
55
Unit
V
V
mV
V/ns
µA
µA
%
1. Guaranteed by design and characterization, not 100% tested in production.
2. Slew rate measured through ±75mV window centered around differential zero.
Table 14:DC Electrical Characteristics for 3.3V LVCMOS (V_DDO = 3.3V±5%, TA = -40°C to +85°C)¹
Symbol
VOH
VOL
IOZDD
IOZDD
VIH
VIL
VIH
VIL
VIH
VIL
TR/TF
Parameter
Test Conditions
Output HIGH Voltage
IOH = -15mA
Output LOW Voltage
IOL = 15mA
Output Leakage Current (OUT1~4) Tri-state outputs, VDDO = 3.465V
Output Leakage Current (OUT0) Tri-state outputs, VDDO = 3.465V
Input HIGH Voltage
Single-ended inputs - CLKSEL, SD/OE
Input LOW Voltage
Single-ended inputs - CLKSEL, SD/OE
Input HIGH Voltage
Single-ended input OUT0_SEL_I2CB
Input LOW Voltage
Single-ended input OUT0_SEL_I2CB
Input HIGH Voltage
Single-ended input - XIN/REF
Input LOW Voltage
Single-ended input - XIN/REF
CLKSEL, SD/OE, SEL1/SDA,
Input Rise/Fall Time
SEL0/SCL
1. See “Recommended Operating Conditions” table.
Min
2.4
0.7xVDDD
GND - 0.3
2
GND - 0.3
0.8
GND - 0.3
Typ
Max
Unit
VDDO
V
0.4
V
5
µA
30
µA
VDDD + 0.3 V
0.3xVDDD V
VDDO0 + 0.3 V
0.4
V
1.2
V
0.4
V
300
nS
Table 15:DC Electrical Characteristics for 2.5V LVCMOS (V_DDO = 2.5V±5%, TA = -40°C to +85°C)
Symbol
VOH
VOL
IOZDD
IOZDD
VIH
VIL
VIH
VIL
VIH
VIL
TR/TF
Parameter
Test Conditions
Output HIGH Voltage
IOH = -12mA
Output LOW Voltage
IOL = 12mA
Output Leakage Current (OUT1~4) Tri-state outputs, VDDO = 2.625V
Output Leakage Current (OUT0) Tri-state outputs, VDDO = 2.625V
Input HIGH Voltage
Single-ended inputs - CLKSEL, SD/OE
Input LOW Voltage
Single-ended inputs - CLKSEL, SD/OE
Input HIGH Voltage
Single-ended input OUT0_SEL_I2CB
Input LOW Voltage
Single-ended input OUT0_SEL_I2CB
Input HIGH Voltage
Single-ended input - XIN/REF
Input LOW Voltage
Single-ended input - XIN/REF
Input Rise/Fall Time
CLKSEL, SD/OE, SEL1/SDA,
SEL0/SCL
Min
0.7xVDDO
0.7xVDDD
GND - 0.3
1.7
GND - 0.3
0.8
GND - 0.3
Typ
Max
Unit
V
0.4
V
5
µA
30
µA
VDDD + 0.3 V
0.3xVDDD V
VDDO0 + 0.3 V
0.4
V
1.2
V
0.4
V
300
nS
PROGRAMMABLE CLOCK GENERATOR
14
REVISION G 07/07/15