89HP0604SB Datasheet, PDF (11/22 Pages) Integrated Device Technology – 4 Channel 6Gbps SAS/SATA Signal Repeater

IDT 89HP0604SB Data Sheet
Electrical Specifications
Absolute Maximum Ratings
Note: All voltage values, except differential voltages, are measured with respect to ground pins.
Parameter
Value
Unit
Supply voltage range VDD
–0.5 to 1.35
V
Voltage range Differential I/O
–0.5 to VDD +0.5
V
Control I/O
–0.5 to VDD + 0.5
V
ESD requirements: Electrostatic discharge
Human body model
±2000
V
ESD requirements: Charged-Device Model (CDM)
±500
V
ESD requirements: Machine model
Storage ambient temperature
±125
V
-55 to 150
°C
Table 4 Absolute Maximum Ratings
Warning: Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only and functional operation of the device at these or any conditions beyond those indicated under Recommended Operating Conditions is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
Recommended Operating Conditions
Parameter
Notes
Min
Power Supply Pin Requirements
VDD
1.2V DC analog supply voltage (specified at bump pins) 1.14
Temperature Requirements
TA
Ambient operating temperature - Commercial
0
Ambient operating temperature - Industrial
-40
TJUNCTION
Junction operating temperature
0
Table 5 P0604SB Operating Conditions
Typical
1.2
—
—
—
Max
1.26
70
85
125
Unit
V
°C
°C
°C
11
February 8, 2011