ZSSC3131 Datasheet, PDF (1/23 Pages) Integrated Device Technology – Sensor Signal Conditioner for Cost- Optimized Switch Applications

Sensor Signal Conditioner for Cost-
Optimized Switch Applications
ZSSC3131
Datasheet
Brief Description
The ZSSC3131 is a member of the ZSSC313x
product family of CMOS integrated circuits designed
for automotive/ industrial sensor applications. All
family members are well suited for highly-accurate
amplification and sensor-specific correction of
resistive bridge sensor signals. An internal 16-bit
RISC microcontroller running a correction algorithm
compensates sensor offset, sensitivity, temperature
drift, and non-linearity of the connected sensor
element. The required calibration coefficients are
stored by the one-pass calibration procedure in an
on-chip EEPROM.
The ZSSC3131 is optimized for simple switch and
cost-sensitive sensor applications. The integrated
adjustable digital filter enables building fast-switch-
ing real-time applications as well as stabilized
applications for switching input signals that are
unstable or disrupted.
Features
• Adjustable to nearly all resistive bridge sensor
types: maximum analog gain of 105; maximum
overall gain of 420
• Sample rate up to 200 Hz
• ADC resolution 13/14 bit
• Internal temperature compensation
• Integrated adjustable digital filter
• Digital compensation of sensor offset, sensitivity,
temperature drift, and non-linearity
• Output options: ratiometric analog voltage output
(5 - 95% maximum, 12.4 bit resolution) or
ZACwire^TM (digital One-Wire Interface (OWI))
• Sensor biasing by voltage
• High voltage protection up to 33 V
• Supply current: Max. 5.5mA
• Reverse polarity and short circuit protection
• Wide operation temperature range:
-40 to +150°C
• Traceability by user-defined EEPROM entries
* Note: I²C™ is a trademark of NXP.
** FSO = Full Scale Output.
Benefits
• Family approach offers the best fitting IC selec-
tion to build cost-optimized applications
• No external trimming components required
• Low number of external components needed
• PC-controlled configuration and One-Pass/ end-
of-line calibration via I²C™* or ZACwire™
interface: Simple, cost-efficient, quick, and pre-
cise
• High accuracy (0.25% FSO** @ -25 to +85°C;
0.5% FSO @ -40 to +125°C)
• Optimized for automotive/industrial environments
due to robust protection circuitries, excellent
electromagnetic compatibility, and AEC-Q100
qualification
Available Support
• Evaluation Kits
• Application Notes
• Mass Calibration System
Physical Characteristics
• Supply voltage 4.5 to 5.5 V
• Operation temperature: -40°C to +125°C
(-40°C to +150°C extended temperature range
depending on product version)
• Available in RoHS-compliant JEDEC-SSOP14
package or delivery as die
ZSSC3131 Minimum Application Requirements
Sensor
Module
VCC
ZSSC3131
OUT
GND
© 2016 Integrated Device Technology, Inc.
1
January 25, 2016