|
ZSPM1363 Datasheet, PDF (1/2 Pages) Integrated Device Technology – True Digital PWM | |||
|
ZSPM1363 True Digital PWM
Controller (Dual-Phase, Single-Rail)
ZSPM1363
Datasheet
Brief Description
The ZSPM1363 is a configurable true-digital dual-
phase PWM controller for high-current, non-isolated
DC/DC supplies. It operates as a synchronous step-
down converter in a single-rail and dual-phase con-
figuration.
The ZSPM1363 integrates a digital control loop, opti-
mized for maximum flexibility and stability, as well as
load step and steady-state performance. In addition,
a rich set of protection and monitoring functions is
provided. On-chip, non-volatile memory (NVM) and
an I2C interface facilitate configuration.
The PC-based IDT Pink Power Designer⢠graphical
user interface (GUI) provides a user-friendly and
easy-to-use interface to the device for communi-
cation and configuration. It can guide the user
through the design of the digital compensator and
offers intuitive configuration methods for additional
features, including protection and sequencing.
Benefits
⢠Fast configurability and design flexibility
⢠Simplified design and integration
⢠Reduced component count through system level
integration
⢠Simplified monitoring for system power and
thermal management
⢠Higher energy efficiency across all output loading
conditions
Physical Characteristics
⢠Operation temperature: -40°C to +125°C
⢠Operation from a single 5V or 3.3V supply
⢠VOUT max: 5V
⢠Lead-free (RoHS compliant) 32-pin QFN package
(5mm x 5mm)
Available Support
⢠Evaluation Kit
⢠PC-based Pink Power Designer⢠GUI
Features
⢠Programmable digital control loop
⢠Dual-phase, single-rail solution
⢠Power modes (phase addition/drop)
⢠Optional PMBus⢠address selection without
external resistors
⢠VIN feed-forward
⢠Advanced, digital control techniques
ï§ Tru-sample Technologyâ¢
ï§ State-Law Control⢠(SLC)
ï§ Sub-cycle Response⢠(SCR)
⢠Improved transient response and noise immunity
⢠Discontinuous conduction mode (DCM) and
phase dropping at light loads
⢠Protection features
ï§ Over-current protection
ï§ Over-voltage protection (VIN, VOUT)
ï§ Under-voltage protection (VIN, VOUT)
ï§ Overloaded startup
ï§ Restart and delay
⢠Fuse-based NVM for improved reliability
⢠Re-programmable one-time programmable (OTP)
memory feature
⢠VOUT sequencing from external source
⢠Pin-strapping options: RTUNE and RVSET
⢠Current balancing between both phases
⢠Tri-state PWM outputs
⢠Additional driver support options
⢠Constant on-time controller (COT) in DCM
ZSPM1363 Typical Application Diagram
ZSPM1363
QFN32 5mm x 5mm
ZSPM9060
VIN
PQFN 6mm x 6mm
Current Sensing
Digital Control Loop
MOSFET
Driver
VOUT
Power Management
Housekeeping
and
Communication
MOSFET
Driver
© 2016 Integrated Device Technology, Inc.
1
April 19, 2016
|
▷ |