|
P9242-R Datasheet, PDF (1/31 Pages) Integrated Device Technology – Wireless Power Transmitter | |||
|
Wireless Power Transmitter
for 15W Applications
P9242-R
Datasheet
Description
The P9242-R is a highly integrated, magnetic induction, wireless
power transmitter supporting up to 15W. The system-on-chip
operates with an input voltage range of 4.25V to 21V.
The transmitter includes an industry-leading 32-bit ARM®
Cortex®-M0 processor offering a high level of programmability
while consuming extremely low standby power. The P9242-R
features two LED outputs with pre-defined user-programmable
blinking patterns, buzzer, and programmable over-current
protection supporting a wide range of applications. The I2C serial
communication allows the user to read information such as
voltage, current, frequency, and fault conditions. The P9242-R
includes an under-voltage lockout and thermal management cir-
cuit to safe guard the device under fault conditions. Together with
the P9221-R receiver (RX), the P9242-R is a complete wireless
power system solution.
The P9242-R is available in a lead-free, space-saving 48-VFQFN
package. The product is rated for a -40ºC to +85ºC operating
temperature range.
Typical Applications
ï§ Charging pad
ï§ Accessories
ï§ Cradle
ï§ Tablets
Features
ï§ Power transfer up to 15W
ï§ Wide input voltage range: 4.25V to 21V
ï§ WPC-1.2.2 compliant, MP-A2 coil configuration
ï§ Integrated step-down switching regulator
ï§ Embedded 32-bit ARM® Cortex®-M0 processor
ï§ Integrated drivers for external power FETs
ï§ Simultaneous voltage and current demodulation scheme for
communication
ï§ Integrated current sense amplifier
ï§ Low standby power
ï§ Dedicated remote temperature sensing
ï§ Programmable current limit
ï§ Power transfer LED indicator
ï§ Foreign objects detection (FOD)
ï§ Pre-defined user-programmable LED pattern
ï§ Active-LOW enable pin for electrical on/off
ï§ Over-current and over-temperature protection
ï§ Supports I2C interface
ï§ -40 to +85°C ambient operating temperature range
ï§ 48-VFQFN (6 ï´ 6 mm) RoHS-compliant package
Basic Application Circuit
RSNS
12V
L
SW_S
VIN_LDO
LDO33
LDO18
PREG
Programming
resistors
ILIM
LED_PAT
P9242-R
GH_BRG1
SW_BRG1
GL_BRG1
GH_BRG2
SW_BRG2
GL_BRG2
Peak
detector
CP
LP
© 2016 Integrated Device Technology, Inc
1
December 16, 2016
|
▷ |