P9036B Datasheet, PDF (1/24 Pages) Integrated Device Technology – 12V Wireless Power Transmitter IC for TX-A6

Product Datasheet
Features
 5W WPC 1.2 Compliant Wireless Power
Transmitter Single Chip Solution for TX-A6
 Excellent EMI performance eliminates
need for EMI filters
 12V Operating Input Voltage
 Closed-Loop Power Transfer Control Between
Base Station and Mobile Device
 Demodulates and Decodes WPC-Compliant
Message Packets
 5V Regulated DC/DC Converter
 Integrated RESET Function
 Internal half-bridge power MOSFETs
 Proprietary Back-Channel Communication
 I²C Interface
 Push-Pull GPIO/LED Indicator Outputs
 Over-Temperature Protection
 Optional Buzzer Support
 Foreign Object Detection (FOD)
Applications
 WPC-Compliant Wireless Charging Base
Stations
Base Station
Transmitter(s)
Control System
Wireless
Interface
Control
Mobile Device
Receiver
Control System
Cont
Sensing
Control
Comm
DeMod
Comm
Load
Reflection
IN
PWR
Power Generation
Induction
Comm
Mod
Cont
Sensing
Control
Power Pick-Up
Out
PWR
Package: 6x6-48 TQFN
12V Wireless Power
Transmitter IC for TX-A6
P9036B
Description
The P9036B is a highly integrated WPC-compliant wireless power
transmitter IC for power transmitter WPC design TX-A6. This device
operates with a 12Vdc adaptor, and drives an external load directly via
an internal half-bridge. It controls the transferred power by changing the
switching frequency of the half-bridge inverter from 110 kHz to 205 kHz
as specified by the WPC specification for an “A6” transmitter. It
contains logic circuits required to demodulate and decode WPC-
compliant message packets sent by the mobile device to adjust the
transferred power.
The P9036B is an intelligent device, which manages mobile device
detection, and selection of one of the three coils of the A6 transmitter
coil without user supervision. The A6 configuration allows free mobile
device positioning over a wider area than configurations that use a
single coil, detecting a mobile device for charging while minimizing idle
power. Once the mobile device is detected and authenticated, the
P9036B continuously monitors all communications from the mobile
device, and adjusts the transmitted power accordingly by varying the
switching frequency of the internal half-bridge inverter.
The P9036B can optionally support a proprietary back-channel
communication mode, which enables the device to communicate with
IDT’s wireless power receiver solutions. This feature enables additional
layers of capabilities beyond the standard WPC requirements.
The P9036B includes over-temperature/current protection and WPC
compliant Foreign Object Detection (FOD) to protect the base station
from overloading in the presence of a metallic foreign object.
Additionally, it manages fault conditions associated with power transfer
and controls LED outputs to indicate operating status.
Revision 1.0.0
1
© 2016 Integrated Device Technology, Inc.