IDTQS3383_11 Datasheet, PDF (1/5 Pages) Integrated Device Technology – QUICKSWITCH PRODUCTS HIGH-SPEED CMOS 10-BIT BUS EXCHANGE SWITCH

IDTQS3383
HIGH-SPEED CMOS 10-BIT BUS EXCHANGE SWITCH
QUICKSWITCH^® PRODUCTS
HIGH-SPEED CMOS 10-BIT
BUS EXCHANGE SWITCH
INDUSTRIAL TEMPERATURE RANGE
IDTQS3383
FEATURES:
• Enhanced N channel FET with no inherent diode to Vcc
• 5Ω bidirectional switches connect inputs to outputs
• Zero propagation delay, zero added ground bounce
• Undershoot clamp diodes on all switch and control inputs
• Bus exchange allows nibble swap
• Available in QSOP package
APPLICATIONS:
• Hot-swapping, hot-docking
• Voltage translation (5V to 3.3V)
• Resource sharing
• Crossbar switching
DESCRIPTION:
The QS3383 provides ten high-speed CMOS TTL-compatible bus
switches. The low ON resistance of the QS3383 allows inputs to be
connected to outputs without adding propagation delay and without gener-
ating additional ground bounce noise. The Bus Enable (BE) signal turns
the switches on. The Bus Exchange (BX) signal provides nibble swap of
the AB and CD pairs of signals. This exchange configuration allows byte
swapping of buses in systems. It can also be used as a 5-wide 2-to-1
multiplexer and to create low delay barrel shifters, etc.
The QS3383 is characterized for operation at -40°C to +85°C.
FUNCTIONAL BLOCK DIAGRAM
A0
B0
A4
B4
BX
BE
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
INDUSTRIAL TEMPERATURE RANGE
1
c 2011 Integrated Device Technology, Inc.
C0
D0
C4
D4
OCTOBER 2011
DSC-5571/5