IDTAMB0480 Datasheet, PDF (1/15 Pages) Integrated Device Technology – ADVANCED MEMORY BUFFER FOR FULLY BUFFERED DIMM MODULES

IDTAMB0480
ADVANCED MEMORY BUFFER FOR FULLY BUFFERED DIMM
COMMERCIAL TEMPERATURE RANGE
ADVANCED MEMORY BUFFER
FOR FULLY BUFFERED DIMM
MODULES
IDTAMB0480
PRODUCT
BRIEF
FEATURES:
• Advanced Memory Buffer for Fully buffered DIMMs
• 3.2 and 4 Gbit/s serial speeds (DDR2-533 and 667 DRAM)
• Support for up to eight DIMMs per channel
• Repeater Mode for extending FB-DIMM links
• Northbound and Southbound single lane fail over and channel
error detection
• Voltage and Timing margin high-speed I/O test capability
• Fully Supports the FB-DIMM configuration register set
• Test features supported include:
- Integrated thermal sensor and status indicator
- Supports MEMBIST, IBIST and Virtual Host mode
- Transparent mode and direct access mode for DRAM testing
• Complies with JEDEC Architecture and Protocol Specification
• Available in 655 ball FCBGA package
EXPANDED FEATURES:
• Wide range DDR Timing Control
• Superfine adjustment for DDR timing
• Wide range of DDR slew rate control
• Slew rate controllable independent of output impedance
• High speed SMBus in test mode
• IBIST IDT PRBS Generator
DESCRIPTION:
The fully buffered dual in-line memory module (FB-DIMM) is the next
generation memory architecture to meet the growing memory requirement of
servers and workstations. The IDT Advanced Memory Buffer (AMB) chip is the
essential building block located on each FB-DIMM. The IDT AMB receives
commands and data from the host controller to control and write/read data to/
from the DRAMs on the DIMM. Commands and write data are sent southbound
from the host controller to AMBs in a daisy chain fashion and interpreted by the
target AMB. Status and read data are sent northbound from AMBs to the host
controller also in a daisy chain fashion, passing through non-target AMBs. This
unique channel structure alleviates buffer loading issues common in registered
DIMM technology, enabling designers to use a large number of DIMMs within
a single system.
IDTAMB0480 complies with the latest JEDEC defined FB-DIMM Architecture
and Protocol Specification and supports DDR2-533 and DDR2-667 DRAM.
It also enables serial data transfer at 3.2 and 4.0Gbps. The IDTAMB0480
supports servers, workstations, storage devices and communication applications
that support the next generation FB-DIMM architecture.
FDB MEMORY CHANNEL
Host
14
Memory
Controller
10
DDR2
DDR2
DDR2
DDR2
IDT
AMB
DDR2
DDR2
DDR2
DDR2
DDR2
DDR2
DDR2
DDR2
IDT
AMB
DDR2
DDR2
DDR2
DDR2
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
COMMERCIAL TEMPERATURE RANGE
1
c 2006 Integrated Device Technology, Inc.
DDR2
DDR2
DDR2
DDR2
IDT
AMB
DDR2
DDR2
DDR2
DDR2
Up to 8 modules
DDR2
DDR2
DDR2
DDR2
IDT
AMB
DDR2
DDR2
DDR2
DDR2
APRIL 2006
DSC - 7042/2