IDT8N4SV75 Datasheet, PDF (1/19 Pages) Integrated Device Technology – Fourth generation FemtoClock

LVDS Frequency-Programmable VCXO
IDT8N4SV75
DATA SHEET
General Description
The IDT8N4SV75 is a LVDS Frequency-Programmable VCXO with
very flexible frequency and pull-range programming capabilities. The
device uses IDT’s fourth generation FemtoClock® NG technology for
an optimum of high clock frequency and low phase noise
performance. The device accepts 2.5V or 3.3V supply and is
packaged in a small, lead-free (RoHS 6) 6-lead ceramic 5mm x 7mm
x 1.55mm package.
The device can be factory-programmed to any frequency in the
range of 15.476MHz to 866.67MHz and from 975MHz to 1,300MHz
to the very high degree of frequency precision of 218Hz or better.
The extended temperature range supports wireless infrastructure,
telecommunication and networking end equipment requirements.
Features
• Fourth generation FemtoClock® NG technology
• Programmable clock output frequency from 15.476MHz to
866.67MHz and from 975MHz to 1,300MHz
• Frequency programming resolution is 218Hz and better
• Factory-programmable VCXO pull range and control voltage
polarity
• Absolute pull-range (APR) programmable from ±4.5 to
±754.5ppm
• One 2.5V / 3.3V LVDS clock output
• Output enable control input, LVCMOS/LVTTL compatible
• RMS phase jitter @ 156.25MHz (12kHz - 20MHz): 
0.53ps (typical)
• 2.5V or 3.3V supply voltage
• -40°C to 85°C ambient operating temperature
• Lead-free (RoHS 6) 6-lead ceramic 5mm x 7mm x 1.55mm
package
Block Diagram
OSC ^÷P
114.285 MHz
PFD
&
LPF
FemtoClock® NG
VCO
÷N
1950-2600MHz
2
÷MINT, MFRAC
VC
OE
Pullup
A/D
7
25
7
Configuration Register (ROM)
(Frequency, APR, Polarity)
Pin Assignment
VC 1
6 V_DD
Q
OE 2
5 nQ
nQ
GND 3
4Q
IDT8N4SV75
6-lead ceramic 5mm x 7mm x 1.55mm
package body
CD Package
Top View
IDT8N4SV75CCD REVISION B NOVEMBER 6, 2013
1
©2013 Integrated Device Technology, Inc.