|
IDT821064 Datasheet, PDF (1/33 Pages) Integrated Device Technology – QUAD PROGRAMMABLE PCM CODEC WITH GCI INTERFACE | |||
|
QUAD PROGRAMMABLE PCM CODEC
WITH GCI INTERFACE
IDT821064
FEATURES
⢠4 channel CODEC with on-chip digital filters
⢠Software selectable compressed (A/µ-law) or linear code con-
version
⢠Meets ITU-T G.711 - G.714 requirements
⢠Programmable digital filter adapting to system demands:
- AC impedance matching
- Transhybrid balance
- Frequency response correction
- Gain setting
⢠GCI (IOM-2) control interface
⢠Broadcast mode for coefficient setting
⢠7 SLIC signaling pins (including 2 debounced pins) per channel
⢠Fast hardware ring trip mechanism
⢠Two programmable tone generators per channel for testing,
ringing and DTMF generation
⢠FSK generator
⢠Two programmable chopper clocks
⢠Master clock frequency selectable: 2.048 MHz or 4.096 MHz
⢠Advanced test capabilities
- 3 analog loop back tests
- 5 digital loop back tests
- Level metering function
⢠High analog driving capability (300⦠AC )
⢠TTL and CMOS compatible digital I/O
⢠CODEC identification
⢠+5 V single power supply
⢠Low power consumption
⢠Operating temperature range: -40 °C to +85 °C
⢠Package available: 64 pin PQFP
FUNCTIONAL BLOCK DIAGRAM
VIN1
VOUT1
2 Inputs
3 I/Os
2 Outputs
MCLK
CHCLK1
CHCLK2
CH1
Filter and A/D
D/A and Filter
SLIC Signaling
CH2
PLL and Clock
Generation
DSP
CORE
General Control
Logic
CH3
Filter and A/D
D/A and Filter
SLIC Signaling
CH4
PCM/GCI Interface
VIN3
VOUT3
2 Inputs
3 I/Os
2 Outputs
DD
DU
RESET
S0 S1 FSC DCL
The IDT logo is a registered trademark of Integrated Device Technology, Inc
INDUSTRIAL TEMPERATURE RANGE
1
© 2003 Integrated Device Technology, Inc.
MARCH 14, 2003
DSC-6036/5
|
▷ |