IDT74FCT16501AT_06 Datasheet, PDF (1/7 Pages) Integrated Device Technology – FAST CMOS 18-BIT REGISTERED TRANSCEIVER

IDT74FCT16501AT/CT
FAST CMOS 18-BIT REGISTERED TRANSCEIVER
FAST CMOS
18-BIT REGISTERED
TRANSCEIVER
INDUSTRIAL TEMPERATURE RANGE
IDT74FCT16501AT/CT
FEATURES:
• 0.5 MICRON CMOS Technology
• High-speed, low-power CMOS replacement for ABT functions
• Typical tSK(o) (Output Skew) < 250ps
• Low input and output leakage ≤ 1µA (max.)
• ESD > 2000V per MIL-STD-883, Method 3015; > 200V using
machine model (C = 200pF, R = 0)
• High drive outputs (–32mA IOH, 64mA IOL)
• Power off disable outputs permit “live insertion”
• Typical VOLP (Output Ground Bounce) < 1.0V at VCC = 5V,
TA = 25°C
• Available in TSSOP package
DESCRIPTION:
The FCT16501T 18-bit registered transceivers are built using advanced
dual metal CMOS technology. These high-speed, low-power 18-bit registered
bus transceivers combine D-type latches and D-type flip-flops to allow data flow
in transparent, latched and clocked modes. Data flow in each direction is
controlled by output-enable (OEAB and OEBA), latch enable (LEAB and LEBA)
and clock (CLKAB and CLKBA) inputs. For A-to-B data flow, the device
operates in transparent mode when LEAB is high. When LEAB is low, the A data
is latched if CLKAB is held at a high or low logic level. If LEAB is low, the A bus
data is stored in the latch/flip-flop on the low-to-high transition of CLKAB. OEAB
is the output enable for the B port. Data flow from the B port to the A port is similar
but requires using OEBA, LEBA and CLKBA. Flow-through organization of
signal pins simplifies layout. All inputs are designed with hysteresis for improved
noise margin.
The FCT16501T are ideally suited for driving high-capacitance loads and
low-impedance backplanes. The output buffers are designed with power off
disable capability to allow "live insertion" of boards when used as backplane
drivers.
FUNCTIONAL BLOCK DIAGRAM
1
OEAB
30
CLKBA
28
LEBA
27
OEBA
55
CLKAB
2
LEAB
3
A1
C
C
D
D
54
B1
C
C
D
D
TO 17 OTHER CHANNELS
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
INDUSTRIAL TEMPERATURE RANGE
1
© 2006 Integrated Device Technology, Inc.
june 2006
DSC-5435/4