IDT74ALVC162836 Datasheet, PDF (1/6 Pages) Integrated Device Technology – 3.3V CMOS 20-BIT UNIVERSAL BUS DRIVER WITH 3-STATE OUTPUTS

IDT74ALVC162836
3.3V CMOS 20-BIT UNIVERSAL BUS DRIVER WITH 3-STATE OUTPUTS
3.3V CMOS 20-BIT
UNIVERSAL BUS DRIVER
WITH 3-STATE OUTPUTS
INDUSTRIAL TEMPERATURE RANGE
IDT74ALVC162836
FEATURES:
• 0.5 MICRON CMOS Technology
• Typical tSK(o) (Output Skew) < 250ps
• ESD > 2000V per MIL-STD-883, Method 3015; > 200V using
machine model (C = 200pF, R = 0)
• VCC = 3.3V ± 0.3V, Normal Range
• VCC = 2.7V to 3.6V, Extended Range
• VCC = 2.5V ± 0.2V
• CMOS power levels (0.4µ W typ. static)
• Rail-to-Rail output swing for increased noise margin
• Available in SSOP and TSSOP packages
DRIVE FEATURES:
• Light Balanced Output Drivers: ±12mA
• Minimal switching noise
FUNCTIONAL BLOCK DIAGRAM
DESCRIPTION:
This 20-bit universal bus driver is built using advanced dual metal CMOS
technology. Data flow from A to Y is controlled by the output-enable (OE)
input. The device operates in the transparent mode when the latch-enable
(LE) input is low. When LE is high, the A data is latched if the clock (CLK)
input is held at a high or low logic level. If LE is high, the A data is stored
in the latch/flip-flop on the low-to-high transition of CLK. When OE is high,
the outputs are in the high-impedance state.
The ALVC162836 has series resistors in the device output structure
which will significantly reduce line noise when used with light loads. This
driver has been designed to drive ±12mA at the designated threshold
levels.
APPLICATIONS:
• SDRAM Modules
• PC Motherboards
• Workstations
OE ¹
CLK ⁵⁶
29
LE
A1 ⁵⁵
1D
C1
CLK
TO 19 OTHER CHANNELS
2 _Y1
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
INDUSTRIAL TEMPERATURE RANGE
1
© 2004 Integrated Device Technology, Inc.
JANUARY 2004
DSC-4900/5