IDT71V428 Datasheet, PDF (1/9 Pages) Integrated Device Technology – 3.3V CMOS STATIC RAM 4 MEG (1M x 4-BIT)

3.3V CMOS Static RAM
4 Meg (1M x 4-Bit)
IDT71V428S
IDT71V428L
Features
◆ _{1M x 4 advanced high-speed CMOS Static RAM}
◆ _{JEDEC Center Power / GND pinout for reduced noise}
◆ _{Equal access and cycle times}
— Commercial and Industrial: 10/12/15ns
◆ _{Single 3.3V power supply}
◆ _{One Chip Select plus one Output Enable pin}
◆ _{Bidirectional data inputs and outputs directly}
LVTTL-compatible
◆ _{Low power consumption via chip deselect}
◆ _{Available in 32-pin, 400 mil plastic SOJ package.}
Functional Block Diagram
Description
The IDT71V428 is a 4,194,304-bit high-speed Static RAM orga-
nized as 1M x 4. It is fabricated using IDT’s high-perfomance, high-
reliability CMOS technology. This state-of-the-art technology, com-
bined with innovative circuit design techniques, provides a cost-
effective solution for high-speed memory needs.
The IDT71V428 has an output enable pin which operates as fast as
5ns, with address access times as fast as 10ns. All bidirectional inputs
and outputs of the IDT71V428 are LVTTL-compatible and operation is
from a single 3.3V supply. Fully static asynchronous circuitry is used,
requiring no clocks or refresh for operation.
The IDT71V428 is packaged in a 32-pin, 400 mil Plastic SOJ.
A0
•
•
•
ADDRESS
•
•
DECODER
•
A19
4,194,304-BIT
MEMORY ARRAY
I/O0 – I/O3
•
4
4
WE
OE
CONTROL
CS
LOGIC
1
©2004 Integrated Device Technology, Inc.
4
I/O CONTROL
3623 drw 01
SEPTEMBER 2004
DSC-3623/06