IDT70V08S_15 Datasheet, PDF (1/21 Pages) Integrated Device Technology – HIGH-SPEED 3.3V 64K x 8 DUAL-PORT STATIC RAM

HIGH-SPEED 3.3V
64K x 8 DUAL-PORT
STATIC RAM
IDT70V08S/L
Features
◆ _{True Dual-Ported memory cells which allow simultaneous}
access of the same memory location
◆ _{High-speed access}
– Commercial: 15/20/25/35ns (max.)
– Industrial: 20ns (max.)
◆ _{Low-power operation}
– IDT70V08S
Active: 550mW (typ.)
Standby: 5mW (typ.)
– IDT70V08L
Active: 550mW (typ.)
Standby: 1mW (typ.)
◆ _{Dual chip enables allow for depth expansion without}
external logic
Functional Block Diagram
R/W L
CE0L
CE1L
OE_L
◆ _{IDT70V08 easily expands data bus width to 16 bits or}
more using the Master/Slave select when cascading more
than one device
◆ _{M/S = VIH for BUSY output flag on Master,}
M/S = VIL for BUSY input on Slave
◆ _{Busy and Interrupt Flags}
◆ _{On-chip port arbitration logic}
◆ _{Full on-chip hardware support of semaphore signaling}
between ports
◆ _{Fully asynchronous operation from either port}
◆ _{LVTTL-compatible, single 3.3V (±0.3V) power supply}
◆ _{Available in a 100-pin TQFP}
◆ _{Industrial temperature range (–40°C to +85°C) is available}
for selected speeds
◆ _{Green parts available, see ordering information}
R/W_R
CE0R
CE1R
OE R
I/O 0-7L
I/O
Control
I/O
Control
BUSY
(1,2)
L
A15L
A0L
Address
Decoder
64Kx8
MEMORY
ARRAY
70V08
A_15L
A 0L
CE _0L
CE1L
OE _L
R/W _L
ARBITRATION
INTERRUPT
SEMAPHORE
LOGIC
SEML
INT
(2)
L
(1)
M/S
NOTES:
1. BUSY is an input as a Slave (M/S-VIL) and an output when it is a Master (M/S-VIH).
2. BUSY and INT are non-tri-state totem-pole outputs (push-pull).
1
©2015 Integrated Device Technology, Inc.
I/O 0-7R
BUSYR^(1,2)
Address
Decoder
A15R
A 0R
A15R
A _0R
CE_0R
CE1R
OE_R
R/W _R
3740 drw 01
SEMR
INT R⁽²⁾
FEBRUARY 2015
DSC-3740/9