|
IDT7016S35PF8 Datasheet, PDF (1/20 Pages) Integrated Device Technology – HIGH-SPEED 16K X 9 DUAL-PORT STATIC RAM | |||
|
HIGH-SPEED
16K X 9 DUAL-PORT
STATIC RAM
IDT7016S/L
Features
â True Dual-Ported memory cells which allow simultaneous
reads of the same memory location
â High-speed access
â Commercial:12/15/20/25/35ns (max.)
â Industrial: 20ns (max.)
â Military: 20/25/35ns (max.)
â Low-power operation
â IDT7016S
Active: 750mW (typ.)
Standby: 5mW (typ.)
â IDT7016L
Active: 750mW (typ.)
Standby: 1mW (typ.)
â IDT7016 easily expands data bus width to 18 bits or more
using the Master/Slave select when cascading more than
one device
â M/S = VIH for BUSY output flag on Master
M/S = VIL for BUSY input on Slave
â Busy and Interrupt Flag
â On-chip port arbitration logic
â Full on-chip hardware support of semaphore signaling
between ports
â Fully asynchronous operation from either port
â TTL-compatible, single 5V (±10%) power supply
â Available in ceramic 68-pin PGA, 68-pin PLCC, and an 80-
pin TQFP
â Industrial temperature range (â40°C to +85°C) is available
for selected speeds
â Green parts available, see ordering information
Functional Block Diagram
OEL
CEL
R/WL
OER
CER
R/WR
I/O0L- I/O8L
BUSYL(1,2)
A13L
A0L
I/O
Control
I/O
Control
Address
Decoder
14
CEL
OEL
R/WL
MEMORY
ARRAY
14
ARBITRATION
INTERRUPT
SEMAPHORE
LOGIC
SEML
INTL(2)
NOTES:
1. In MASTER mode: BUSY is an output and is a push-pull driver
In SLAVE mode: BUSY is input.
2. BUSY outputs and INT outputs are non-tri-stated push-pull drivers.
©2009 Integrated Device Technology, Inc.
M/S
1
Address
Decoder
I/O0R-I/O8R
BUSYR(1,2)
A13R
A0R
CER
OER
R/WR
3190 drw 01
SEMR
INTR(2)
JANUARY 2009
DSC 3190/10
|
▷ |