IDT7006S Datasheet, PDF (1/20 Pages) Integrated Device Technology – HIGH-SPEED 16K x 8 DUAL-PORT STATIC RAM

Integrated Device Technology, Inc.
HIGH-SPEED
16K x 8 DUAL-PORT
STATIC RAM
IDT7006S/L
FEATURES:
• True Dual-Ported memory cells which allow simulta-
neous access of the same memory location
• High-speed access
— Military: 20/25/35/55/70ns (max.)
— Commercial: 15/17/20/25/35/55ns (max.)
• Low-power operation
— IDT7006S
Active: 750mW (typ.)
Standby: 5mW (typ.)
— IDT7006L
Active: 750mW (typ.)
Standby: 1mW (typ.)
• IDT7006 easily expands data bus width to 16 bits or
more using the Master/Slave select when cascading
more than one device
• M/S = H for BUSY output flag on Master,
M/S = L for BUSY input on Slave
• Busy and Interrupt Flags
• On-chip port arbitration logic
• Full on-chip hardware support of semaphore signaling
between ports
• Fully asynchronous operation from either port
• Devices are capable of withstanding greater than 2001V
electrostatic discharge
• Battery backup operation—2V data retention
• TTL-compatible, single 5V (±10%) power supply
• Available in a 68-pin PGA, a 68-pin quad flatpack, a 68-
pin PLCC, and a 64-pin TQFP
• Industrial temperature range (–40°C to +85°C) is avail-
able, tested to military electrical specifications
DESCRIPTION:
The IDT7006 is a high-speed 16K x 8 Dual-Port Static
RAM. The IDT7006 is designed to be used as a stand-alone
Dual-Port RAM or as a combination MASTER/SLAVE Dual-
Port RAM for 16-bit-or-more word systems. Using the IDT
MASTER/SLAVE Dual-Port RAM approach in 16-bit or wider
FUNCTIONAL BLOCK DIAGRAM
OEL
W^CEL
R/ L
OER
W^CER
R/ R
I/O0L- I/O7L
BUSYL(1,2)
A13L
A0L
NOTES:
1. (MASTER):
BUSY is
output;
(SLAVE):
BUSY is input.
2. BUSY outputs
and INT
outputs are
non-tri-stated
push-pull.
SEML
(2)
INTL
I/O
Control
I/O
Control
Address
Decoder
14
CEL
OEL
W R/ L
MEMORY
ARRAY
ARBITRATION
INTERRUPT
SEMAPHORE
LOGIC
Address
Decoder
14
CER
W ^OER
R/ R
M/S
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
MILITARY AND COMMERCIAL TEMPERATURE RANGES
©1996 Integrated Device Technology, Inc.
For latest information contact IDT’s web site at www.idt.com or fax-on-demand at 408-492-8391.
6.07
I/O0R-I/O7R
BUSYR ^(1,2)
A13R
A0R
SEMR
INTR ⁽²⁾
2739 drw 01
OCTOBER 1996
DSC-2739/5
1