IDT5P49EE502 Datasheet, PDF (1/26 Pages) Integrated Device Technology – VERSACLOCK® LOW POWER CLOCK GENERATOR IDT5P49EE502

VERSACLOCK^® LOW POWER CLOCK GENERATOR
DATASHEET
IDT5P49EE502
Description
The IDT5P49EE502 is a programmable clock generator
intended for low power, battery operated consumer
applications. There are four internal PLLs, each individually
programmable, allowing for up to five differrent output
frequencies. The frequencies are generated from a single
reference clock. The reference clock can come from either
a TCXO or fundamental mode crystal.
The IDT5P49EE502 can be programmed through the use
of the I²C interfaces. The programming interface enables
the device to be programmed when it is in normal operation
or what is commonly known as in system programmable.
An internal EEPROM allows the user to save and restore
the configuration of the device without having to reprogram
it on power-up.
Each of the four PLLs has an 8-bit reference divider and a
11-bit feedback divider. This allows the user to generate
four unique non-integer-related frequencies. The PLL loop
bandwidth is programmable to allow the user to tailor the
PLL response to the application. For instance, the user can
tune the PLL parameters to minimize jitter generation or to
maximize jitter attenuation. Spread spectrum generation is
supported on one of the PLLs.
Spread spectrum generation is supported on one of the
PLLs. The device is specifically designed to work with
display applications to ensure that the spread profile
remains consistent for each HSYNC in order to reduce
ROW noise. It also may operate in standard spread
sepctrum mode.
There are total four 8-bit output dividers. The outputs are
connected to the PLLs via the switch matrix. The switch
matrix allows the user to route the PLL outputs to any
output bank. This feature can be used to simplify and
optimize the board layout. In addition, each output's slew
rate and enable/disable function can be programmed.
Target Applications
• Smart Mobile Handset
• Personal Navigation Device (PND)
• Camcorder
• DSC
• Portable Game Console
• Personal Media Player
Features
• Four internal PLLs
• Internal non-volatile EEPROM
• Internal I²C EEPROM master interface
• FAST (400kHz) mode I²C serial interfaces
• Input Frequencies
– TCXO: 10 MHz to 40 MHz
– Crystal: 8 MHz to 30 MHz
• Output Frequency Ranges: kHz to 120 MHz
• Each PLL has an 8-bit reference divider and a 11-bit
feedback-divider
• 8-bit output-divider blocks
• One of the PLLs support Spread Spectrum generation
capable of configuration to pixel rate, with adjustable
modulation rate and amplitude to support video clock
with no visible artifacts
• I/O Standards:
– Outputs - 1.8V/2.5V/3.3 V LVTTL/ LVCMOS
• 2 independent adjustable VDDO groups.
• Programmable Slew Rate Control
• Programmable Loop Bandwidth Settings
• Programmable output inversion to reduce bimodal jitter
• Individual output enable/disable
• Power-down/Sleep mode
– 10μA max in power down mode
• 1.8V VDD Core Voltage
• Available in 20pin 3x3mm QFN packages
• -40 to +85 C Industrial Temp operation
IDT® VERSACLOCK^® LOW POWER CLOCK GENERATOR
1
IDT5P49EE502 REV D 072610