IDT2305A Datasheet, PDF (1/7 Pages) Integrated Device Technology – 3.3V ZERO DELAY CLOCK BUFFER

IDT2305A
3.3V ZERO DELAY CLOCK BUFFER
COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGES
3.3V ZERO DELAY CLOCK
BUFFER
IDT2305A
FEATURES:
• Phase-Lock Loop Clock Distribution
• 10MHz to 133MHz operating frequency
• Distributes one clock input to one bank of five outputs
• Zero Input-Output Delay
• Output Skew < 250ps
• Low jitter <200 ps cycle-to-cycle
• IDT2305A-1 for Standard Drive
• IDT2305A-1H for High Drive
• No external RC network required
• Operates at 3.3V VDD
• Power down mode
• Available in SOIC package
FUNCTIONAL BLOCK DIAGRAM
DESCRIPTION:
The IDT2305A is a high-speed phase-lock loop (PLL) clock buffer,
designed to address high-speed clock distribution applications. The zero
delay is achieved by aligning the phase between the incoming clock and
the output clock, operable within the range of 10 to 133MHz.
The IDT2305A is an 8-pin version of the IDT2309A. IDT2305A accepts
one reference input, and drives out five low skew clocks. The -1H version
of this device operates up to 133MHz frequency and has a higher drive than
the -1 device. All parts have on-chip PLLs which lock to an input clock on
the REF pin. The PLL feedback is on-chip and is obtained from the CLKOUT
pad. In the absence of an input clock, the IDT2305A enters power down.
In this mode, the device will draw less than 12µA for Commercial Tempera-
ture range and less than 25µA for Industrial temperature range, the outputs
are tri-stated, and the PLL is not running, resulting in a significant reduction
of power.
The IDT2305A is characterized for both Industrial and Commercial
operation.
REF ¹
PLL
Control
Logic
8
CLKOUT
3 _CLK1
2 _CLK2
5 _CLK3
7
CLK4
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
COMMERCIAL AND INDUSTRIAL
c 2004 Integrated Device Technology, Inc.
TEMPERATURE
1
RANGES
JULY 2004
DSC 6586/3