F2932 Datasheet, PDF (1/20 Pages) Integrated Device Technology – High Reliability SP2T RF Switch

High Reliability SP2T RF Switch
GENERAL DESCRIPTION
The F2932 is a high reliability, low insertion loss, 50 Ω
SP2T absorptive RF switch designed for a multitude of
wireless and other RF applications. This device covers
a broad frequency range from 50 MHz to 8000 MHz.
In addition to providing low insertion loss, the F2932
also delivers high linearity and high isolation
performance while providing a 50 Ω termination to the
unused RF input port.
The F2932 uses a single positive supply voltage of
2.7 V to 5.5 V supporting three states using either
3.3 V or 1.8 V control logic.
COMPETITIVE ADVANTAGE
The F2932 provides the following advantages
Insertion Loss = 0.79 dB*
RFX to RFC Isolation = 67 dB*
IIP3 = +64 dBm*
Active Port Operating Power Handling = 34 dBm
Term Port Operating Power Handling = 27 dBm
Extended Temperature Range = -40°C to 105°C
* 2 GHZ
APPLICATIONS
• Base Station 2G, 3G, 4G
• Portable Wireless
• Repeaters and E911 systems
• Digital Pre-Distortion
• Point to Point Infrastructure
• Public Safety Infrastructure
• WIMAX Receivers and Transmitters
• Military Systems, JTRS radios
• RFID handheld and portable readers
• Test / ATE Equipment
F2932
Datasheet
50 MHz to 8000 MHz
FEATURES
• High Isolation:
o 70 dB @ 1 GHz
o 67 dB @ 2 GHz
o 65 dB @ 3 GHz
o 66 dB @ 4 GHz
• High Linearity:
o IIP2 of 111 dBm
o IIP3 of 64 dBm @ 2 GHz
• Wide Single Positive Supply Voltage Range
• 3.3 V and 1.8 V compatible control logic
• Operating temperature -40 °C to +105 °C
• 4 mm x 4 mm 16 pin QFN package
FUNCTIONAL BLOCK DIAGRAM
VDD VCTL EN
Control
Circuit
50Ω
RFC
50Ω
RF2
RF1
ORDERING INFORMATION
F2932NBGP8
Green
Tape &
Reel
F2932, Rev 1 05/12/2016
1
© 2016 Integrated Device Technology, Inc.