F1423 Datasheet, PDF (1/26 Pages) Integrated Device Technology – TX Differential Input RF Amplifier

TX Differential Input RF Amplifier
GENERAL DESCRIPTION
The F1423 is a 600 MHz to 3000 MHz TX differential
input / single-ended output RF amplifier used in
transmitter applications.
The F1423 TX Amp provides 13.1 dB gain with
+41.8 dBm OIP3 and 5.1 dB noise figure at 2000 MHz.
This device uses a single 5 V supply and 120 mA of I_CC.
This device is packaged in a 4mm x 4mm, 24-pin Thin
QFN with 50 ohm differential RF input and 50 ohm
single ended RF output impedances for ease of
integration into the signal-path.
COMPETITIVE ADVANTAGE
In typical Base Stations, RF Amplifiers are used in the
TX traffic paths to drive the transmit power amplifier.
The F1423 TX Amplifier offers very high reliability due
to its construction using silicon die in a QFN package.
The F1423 includes a broadband differential input to
accept AC-coupled signals directly from a balanced
modulator or RF DAC architecture.
APPLICATIONS
• Multi-mode, Multi-carrier Transmitters
• GSM850/900 Base Stations
• PCS1900 Base Stations
• DCS1800 Base Stations
• WiMAX and LTE Base Stations
• UMTS/WCDMA 3G Base Stations
• PHS/PAS Base Stations
• Public Safety Infrastructure
F1423
Datasheet
600 MHz to 3000 MHz
FEATURES
• Broadband 600 MHz – 3000 MHz
• 13.1 dB typical gain @ 2000 MHz
• 5.1 dB NF @ 2000 MHz
• +41.8 dBm OIP3 @ 2000 MHz
• +21.5 dBm output P1dB @ 2000 MHz
• Single 5 V supply voltage
• I_CC = 120 mA
• Up to +105 °C T_CASE operating temperature
• 50 Ω differential input impedance
• 50 Ω single ended output impedance
• Positive gain slope for board loss
compensation
• Standby mode for power savings
• 4 mm x 4 mm, 24-pin TQFN package
FUNCTIONAL BLOCK DIAGRAM
RFIN
R FO UT
STBY
BAND_SEL
ORDERING INFORMATION
F1423NBGI8
RF Product Line
Green
Tape &
Reel
F1423, Rev O 11/6/2015
1
© 2015 Integrated Device Technology, Inc.