ADC1613S Datasheet, PDF (1/37 Pages) NXP Semiconductors – Single 16-bit ADC; 65 Msps, 80 Msps, 105 Msps or 125 Msps serial JESD204A interface

ADC1613S series
Single 16-bit ADC; 65 Msps, 80 Msps, 105 Msps or 125 Msps;
serial JESD204A interface
Rev. 03 — 2 July 2012
Product data sheet
1. General description
The ADC1613S is a single channel 16-bit Analog-to-Digital Converter (ADC) optimized for
high dynamic performance and low power at sample rates up to 125 Msps. Pipelined
architecture and output error correction ensure the ADC1613S is accurate enough to
guarantee zero missing codes over the entire operating range. Supplied from a 3 V source
for analog and a 1.8 V source for the output driver, it outputs data in serial mode via a
single differential lane, which complies with the JESD204A standard. The integration of
Serial Peripheral Interface allows the user to easily configure the ADCs and the serial
output modes. The device also includes a programmable full-scale SPI to allow a flexible
input voltage range from 1 V (p-p) to 2 V (p-p).
Excellent dynamic performance is maintained from the baseband to input frequencies of
170 MHz or more, making the ADC1613S ideal for use in communications, imaging, and
medical applications.
2. Features and benefits
 SNR, 72.3 dBFS; SFDR, 88 dBc
 Sample rates up to 125 Msps
 Single channel, 16-bit pipelined ADC
core
 3 V, 1.8 V power supplies
 Flexible input voltage range:
1 V (p-p) to 2 V (p-p)
 Serial output
 Power-down mode and Sleep mode
 Pin compatible with ADC1413S series,
ADC1213S series, and ADC1113S125
 Input bandwidth, 600 MHz
 Power dissipation, 550 mW at 80 Msps
 SPI register programming
 Duty cycle stabilizer
 High Intermediate Frequency (IF)
capability
 Offset binary, two’s complement, gray
code
 Compliant with JESD204A serial
transmission standard
 HVQFN32 package
3. Applications
 Wireless and wired broadband
communications
 Spectral analysis
 Ultrasound equipment
 Portable instrumentation
 Imaging systems
®