ADC1004S030 Datasheet, PDF (1/18 Pages) NXP Semiconductors – Single 10 bits ADC, up to 30 MHz, 40 MHz or 50 MHz

ADC1004S030/040/050
Single 10 bits ADC, up to 30 MHz, 40 MHz or 50 MHz
Rev. 04 — 2 July 2012
Product data sheet
1. General description
The ADC1004S030/040/050 are a family of 10-bit high-speed low-power Analog-to-Digital
Converters (ADC) for professional video and other applications. They convert the analog
input signal into 10-bit binary-coded digital signals at a maximum sampling rate of
50 MHz. All digital inputs and outputs are Transistor-Transistor Logic (TTL) and CMOS
compatible, although a low-level sine wave clock input signal is allowed.
The device requires an external source to drive its reference ladder. If the application
requires that the reference is driven via internal sources, Integrated Device Technology
recommends you use one of the ADC1003S030/040/050 family.
2. Features
 10-bit resolution
 Sampling rate up to 50 MHz
 DC sampling allowed
 One clock cycle conversion only
 High signal-to-noise ratio over a large analog input frequency range
(9.4 effective bits at 4.43 MHz full-scale input at f_clk = 40 MHz)
 No missing codes guaranteed
 In-Range (IR) CMOS output
 TTL and CMOS levels compatible digital inputs
 3 V to 5 V CMOS digital outputs
 Low-level AC clock input signal allowed
 External reference voltage regulator
 Power dissipation only 175 mW (typical)
 Low analog input capacitance, no buffer amplifier required
 No sample-and-hold circuit required
3. Applications
 Video data digitizing
 Radar
 Transient signal analysis
  modulators
 Medical imaging
 Barcode scanner
 Global Positioning System (GPS) receiver
®