|
7005S55PFG Datasheet, PDF (1/21 Pages) Integrated Device Technology – HIGH-SPEED 8K x 8 DUAL-PORT STATIC RAM | |||
|
HIGH-SPEED
8K x 8 DUAL-PORT
STATIC RAM
IDT7005S/L
Features
â True Dual-Ported memory cells which allow simultaneous
reads of the same memory location
â High-speed access
â Military: 20/25/35/55/70ns (max.)
â Industrial: 35/55ns (max.)
â Commercial:15/17/20/25/35/55ns (max.)
â Low-power operation
â IDT7005S
Active: 750mW (typ.)
Standby: 5mW (typ.)
â IDT7005L
Active: 700mW (typ.)
Standby: 1mW (typ.)
â IDT7005 easily expands data bus width to 16 bits or more
using the Master/Slave select when cascading more than
one device
Functional Block Diagram
OEL
CEL
R/WL
â M/S = H for BUSY output flag on Master,
M/S = L for BUSY input on Slave
â Interrupt Flag
â On-chip port arbitration logic
â Full on-chip hardware support of semaphore signaling
between ports
â Fully asynchronous operation from either port
â Devices are capable of withstanding greater than 2001V
electrostatic discharge
â Battery backup operationâ2V data retention
â TTL-compatible, single 5V (±10%) power supply
â Available in 68-pin PGA, quad flatpack, PLCC, and a 64-pin
thin quad flatpack
â Industrial temperature range (-40°C to +85°C) is available
for selected speeds
â Green parts available, see ordering information
OER
CER
R/WR
I/O0L- I/O7L
BUSYL(1,2)
A12L
A0L
I/O
Control
I/O
Control
Address
Decoder
13
CEL
OEL
R/WL
MEMORY
ARRAY
13
ARBITRATION
INTERRUPT
SEMAPHORE
LOGIC
SEML
INTL(2)
M/S
NOTES:
1. (MASTER): BUSY is output; (SLAVE): BUSY is input.
2. BUSY outputs and INT outputs are non-tri-stated push-pull.
1
©2012 Integrated Device Technology, Inc.
Address
Decoder
CER
OER
R/WR
I/O0R-I/O7R
BUSYR(1,2)
A12R
A0R
SEMR
INTR(2)
2738 drw 01
SEPTEMBER 2012
DSC 2738/17
|
▷ |