|
651S Datasheet, PDF (1/12 Pages) Integrated Device Technology – Low additive phase jitter RMS | |||
|
Low Skew 1 to 4 Clock Buffer
651S
DATASHEET
Description
The 651S is a low cost, high-speed single input to four output
clock buffer. The 651S has best in class Additive Phase Jitter
of sub 50fsec.
IDT makes many non-PLL and PLL based low skew output
devices as well as Zero Delay Buffers to synchronize clocks.
Contact IDT for all of your clocking needs.
Features
⢠Low additive phase jitter RMS: 50fs
⢠Extremely low skew outputs (50ps)
⢠Low cost clock buffer
⢠Packaged in 8-pin SOIC and 8-pin DFN, Pb-free
⢠Input/Output clock frequency up to 200 MHz
⢠Non-inverting output clock
⢠Ideal for networking clocks
⢠Operating Voltages: 1.8V to 3.3V
⢠Output Enable mode tri-states outputs
⢠Advanced, low power CMOS process
⢠Extended temperature range (-40°C to +105°C)
Block Diagram
ICLK
Q1
Q2
Q3
Q4
Output Enable
651S REVISION A 03/18/15
1
©2015 Integrated Device Technology, Inc.
|
▷ |