JRC0338 Datasheet, PDF (1/1 Pages) IDEA.lnc. – Surface Mount LED

Surface Mount LED J Series for low current or superbright use,
0338 Series Reverse Mount
The 0338 series is designed to mount to pads on the lower side of a pcb with the LED viewed through a hole. This has the benefit
maintaining all parts of the LED below the surface of the PCB, making it especially suitable for use with membrane overlays and
applications where a smooth front surface is desired.
3.2
1.6
1.6
1.1
0.3
2.2
-
+
1.8
1.4
1.4
1.6
Suggested pad dimensions
for reflow soldering
Cathode mark
GENERAL INFORMATION
Operating Temperature Range
Storage Temperature Range
Reflow Soldering Temperature
-40 °C to +85 °C
-40 °C to +90 °C
260 °C for 5 sec max
APPLICATION INFORMATION (ALL RATINGS AT 25 °C AMBIENT)
Part No.
Peak
Emitted _λ
Color
(nM)
∆λ
(nM)
Absolute Maximum Ratings
Pd
If (mA)
Ir
Vr
(mW)
dc
1/10 duty ^@Vr=5V
@ 1 khz (µA)
(V)
JRC0338 Red 632 20
60
25 160 10
5
JGC0338 Green 575 20
60
25 160 10
5
JYC0338 Yellow 591 15
60
25 160 10
5
JOC0338 Orange 621 18
60
25 160 10
5
JYOC0338 YelOrng 611 17
60
25 160 10
5
E/O Characteristics
Iv (mcd)
@If=20mA
Vf (V)
@ If=20mA
2mA Min Typ Min Typ
2
16
40 2.0 2.4
1
11
16 2.0 2.4
2
16
41 2.0 2.4
2
16
41 2.0 2.4
2
16
41 2.0 2.4
2Θ_1/2
(Deg)
130
130
130
130
130
Specifications subject to change without notice. Dimensions are in mm±0.3 unless stated otherwise.
IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: [phone]
J–11
013S-J0338