J78B Datasheet, PDF (1/1 Pages) IDEA.lnc. – T-1, (3-mm) Round, Bi-level PCB Mount LED Indicator

T-1, (3-mm) Round, Bi-level PCB Mount
LED Indicator, J78B Series
The J78B is one of the most popular indicators in LAN hubs and network controllers. Designed to save panel space, the assembly
measures just over 4.3 mm(0.170") in width and can be CMOS driven to save components. Long arrays should be located on a pitch of
4.4 mm(0.173") to avoid crowding and tolerance build-up. For long arrays, also investigate our J784B series which is designed to replace
4 assemblies and is matched to the J78B in height, depth and lamp location.
4.3 (0.17)
9.0(.355)
2.5±.5
IDEA
5.08
2.54
Anode typ
3 typ
9.65
3.5 min
LED 1
IDEA
LED 2
2.54
5.08
2.54
Red or
yellow
Anode
+–
(Pinout for single color)
Green
Anode
(typ for bi-color)
Specify part desired as follows:
J78B/Order Code LED1 + Order Code LED 2
For example: “J78B/H+G” designates an assembly with a red LED on top and a green LED on the bottom.
“Jj78B/(H+G)-RL” designates the same assembly with leads reversed.
ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT)
LED Lamp
Typical Characteristics
Epoxy & Type
Color
Order Code
Peak
λ (nm)
Vf (V)
@If=20mA
Iv (mcd)
@If= 2 mA
2Θ_1/2
(Deg)
Recom.
Op. If
(mA)
Red
I
639
1.8
4.0
50
2 - 10
TInted Diffused
Green
G
575
1.7
2.5
60
2 - 10
Yellow
Y
591
1.85
4.0
45
2 - 10
* Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise.
IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: [phone] Catalog 995A