|
J245B Datasheet, PDF (1/1 Pages) IDEA.lnc. – T-1, (3-mm) Round, Quad PCB Mount LED Indicator | |||
|
T-1, (3-mm) Round, Quad PCB Mount
LED Indicator, J245B Series
J245B is designed to extend the reach of the LED indicators into the front bezel area where the PCB edge remains a distance away and
can be CMOS driven to save components. The four lamps are positioned on a 0.3" pitch. The foot print of the pin-out is the same as the
J244B but the lamps are centered 0.25" above the mounting plane and the lamps are signiï¬cantly more forward.
27.6(1.09)
7.62(.30)
2.5(.10)
20.3(.80)
Anode
Typ
8.6(.34)
6.4(.25)
15.24(.60 )
Ã1.0(0.04)
2 pls
19.1(.75)
3.5(.13 )
+â
(Pinout for single color)
Green
Anode
Red or
yellow
Anode
(typ for bi-color)
Specify part desired as follows:
J245B/Order Code LED1 + Order Code LED 2 + Order Code LED 3 + Order Code LED 4
For example: âJ245B/I+Y+2Gâ designates an assembly with a red LED, a yellow LED and 2 green LED's from left to right.
ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT)
LED Lamp
Typical Characteristics
Epoxy & Type
Color
Order Code
Peak
λ (nm)
Vf (V)
@If=20mA
Iv (mcd)
@If=2 mA
2Î1/2
(Deg)
Recom.
Op. If
(mA)
Red
I
639
1.8
4.0
50
2 - 10
TInted Diffused
Green
G
575
1.7
2.5
60
2 - 10
Yellow
Y
591
1.85
4.0
45
2 - 10
* Speciï¬cations subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise.
IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 Catalog 995A
|