V103A Datasheet, PDF (4/11 Pages) Integrated Circuit Systems – TRIPLE 10-BIT LVDS TRANSMITTER FOR VIDEO

V103A
TRIPLE 10-BIT LVDS TRANSMITTER FOR VIDEO
External Components
Decoupling capacitors should be used for all power pins. The V103A requires no other external
components.
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the V103A. These ratings, which
are standard values for ICS commercially rated parts, are stress ratings only. Functional operation of the
device at these or any other conditions above those indicated in the operational sections of the
specifications is not implied. Exposure to absolute maximum rating conditions for extended periods can
affect product reliability. Electrical parameters are guaranteed only over the recommended operating
temperature range.
Item
Supply Voltage, VCC
CMOS/TTL Input Voltage
CMOS/TTL Output Voltage
LVDS Driver Output Voltage
Storage Temperature
Junction Temperature
Soldering Temperature (10 seconds)
Maximum Power Dissipation @ 25°C
Rating
-0.3 V to +4.0 V
-0.3 V to VCC+0.3 V
-0.3 V to VCC+0.3 V
-0.3 V to VCC+0.3 V
-55 to +150°C
120°C
260°C
1.0 W
Recommended Operation Conditions
Parameter
Ambient Operating Temperature
Power Supply Voltage (measured in respect to GND)
Min.
-20
+3.0
Typ.
+3.3
Max.
+85
+3.6
Units
°C
V
V103A Datasheet
4
11/18/05
Revision 3.2
Integrated Circuit Systems • 525 Race Street, San Jose, CA 95126 • tel [phone] • www.icst.com