ICS501B Datasheet, PDF (4/6 Pages) Integrated Circuit Systems – LOCO PLL CLOCK MULTIPLIER

ICS501B
LOCO™ PLL Clock Multiplier
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the ICS501B. These ratings,
which are standard values for ICS commercially rated parts, are stress ratings only. Functional operation of
the device at these or any other conditions above those indicated in the operational sections of the
specifications is not implied. Exposure to absolute maximum rating conditions for extended periods can
affect product reliability. Electrical parameters are guaranteed only over the recommended operating
temperature range.
Item
Supply Voltage, VDD
All Inputs and Outputs
Ambient Operating Temperature
Storage Temperature
Soldering Temperature
Rating
7V
-0.5 V to VDD+0.5 V
-40 to +85°C
-65 to +150°C
260°C
Recommended Operation Conditions
Parameter
Ambient Operating Temperature
Power Supply Voltage (measured in respect to GND)
Min.
0
+3.14
Typ.
Max.
+70
+5.25
Units
°C
V
DC Electrical Characteristics
VDD=5.0 V ±5% , Ambient temperature 0 to +70°C, unless stated otherwise
Parameter
Symbol Conditions
Min.
Operating Voltage
VDD
3.14
Input High Voltage, ICLK only
Input Low Voltage, ICLK only
Input High Voltage
Input Low Voltage
Input High Voltage
Input Low Voltage
Output High Voltage
Output Low Voltage
IDD Operating Supply Current
V_IH ICLK (pin 1)
V_IL ICLK (pin 1)
V_IH OE (pin 7)
V_IL OE (pin 7)
V_IH S0, S1
V_IL S0, S1
V_OH I_OH = -25 mA
V_OL I_OL = 25 mA
No load
(VDD/2)+1
2.0
VDD-0.5
2.4
Short Circuit Current
CLK output
On-Chip Pull-up Resistor
Pin 7
Input Capacitance, S1, S0, and OE
Pins 4, 6, 7
Nominal Output Impedance
Typ. Max. Units
5.25
V
V
(VDD/2)-1 V
V
0.8
V
V
0.5
V
V
0.4
V
20
mA
+70
mA
270
kΩ
4
pF
20
Ω
MDS 501B C
4
Revision 120704
Integrated Circuit Systems ● 525 Race Street, San Jose, CA 95126 ● tel [phone] ● www.icst.com