ICS85211I Datasheet, PDF (3/12 Pages) Integrated Circuit Systems – LOW SKEW, 1-TO-2 DIFFERENTIAL-TO-LVHSTL FANOUT BUFFER

Integrated
Circuit
Systems, Inc.
ICS85211I
LOW SKEW, 1-TO-2
DIFFERENTIAL-TO-LVHSTL FANOUT BUFFER
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, V_DD
Inputs, V_DD
Outputs, V_DD
Package Thermal Impedance, θ_JA
Storage Temperature, T_STG
4.6V
-0.5V to V_DD + 0.5 V
-0.5V to V_DD + 0.5V
112.7°C/W (0 lfpm)
-65°C to 150°C
NOTE: Stresses beyond those listed under Absolute
Maximum Ratings may cause permanent damage to the
device. These ratings are stress specifications only. Functional
operation of product at these conditions or any conditions be-
yond those listed in the DC Characteristics or AC Character-
istics is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect product reliability.
TABLE 4A. POWER SUPPLY DC CHARACTERISTICS, V_DD = 3.3V ± 5%, TA = -40°C TO 85°C
Symbol Parameter
Test Conditions
Minimum
V_DD
Power Supply Voltage
I_DD
Power Supply Current
3.135
Typical
3.3
Maximum
3.465
50
Units
V
mA
TABLE
4B.
DIFFERENTIAL
DC
CHARACTERISTICS,
V=
DD
3.3V
±
5%,
TA
=
-40°C
TO
85°C
Symbol Parameter
Test Conditions
Minimum Typical Maximum Units
nCLK
I_IH
Input High Current
CLK
V_DD = V_IN = 3.465V
V_DD = V_IN = 3.465V
nCLK
I
Input Low Current
IL
CLK
V_DD = 3.465V, V_IN = 0V
V_DD = 3.465V, V_IN = 0V
-150
-5
V_PP
Peak-to-Peak Input Voltage
0.15
V_CMR
Common Mode Input Voltage; NOTE 1, 2
0.5
NOTE 1: For single ended applications the maximum input voltage for CLK and nCLK is V_DD + 0.3V.
NOTE 2: Common mode voltage is defined as V_IH.
150
µA
150
µA
µA
µA
1.3
V
V_DD - 0.85 V
TABLE
4C.
LVHSTL
DC
CHARACTERISTICS,
V
DD
=
3.3V
±
5%,
TA
=
-40°C
TO
85°C
Symbol Parameter
Test Conditions
Minimum Typical Maximum Units
V_OH
Output High Voltage; NOTE 1
V_OL
Output Low Voltage; NOTE 1
V_SWING Peak-to-Peak Output Voltage Swing
NOTE 1: All outputs must be terminated with 50W to ground.
1.0
1.2
V
0
0.4
V
0.6
0.9
1.2
V
TABLE 5. AC CHARACTERISTICS, V_DD = 3.3V ± 5%, TA = -40°C TO 85°C
Symbol Parameter
Test Conditions
Minimum Typical Maximum Units
f_MAX
Output Frequency
t_PD
Propagation Delay; NOTE 1
IJ 600MHz
0.7
tsk(o) Output Skew; NOTE 2, 4
700
MHz
1.0
ns
30
ps
tsk(pp) Part-to-Part Skew; NOTE 3, 4
250
ps
t_R / t_F
odc
Output Rise/Fall Time
Output Duty Cycle
20% to 80%
200
47
IJ 266.6MHz
49
600
ps
53
%
51
%
All parameters measured at 600MHz unless noted otherwise.
The cycle-to-cycle jitter on the input will equal the jitter on the output. The part does not add jitter.
NOTE 1: Measured from the differential input crossing point to the differential output crossing point.
NOTE 2: Defined as skew between outputs at the same supply voltage and with equal load conditions.
Measured at output differential cross points.
NOTE 3: Defined as skew between outputs on different devices operating at the same supply voltages and with equal load
conditions. Using the same type of inputs on each device, the outputs are measured at the differential cross points.
NOTE 4: This parameter is defined in accordance with JEDEC Standard 65.
85211AMI
www.icst.com/products/hiperclocks.html
REV. B ARPIL 8, 2003
3