ICS512 Datasheet, PDF (3/4 Pages) Integrated Circuit Systems – LOCO™ PLL Clock Multiplier

ICS512
LOCO™ PLL Clock Multiplier
Electrical Specifications
Parameter
Conditions
Minimum Typical
ABSOLUTE MAXIMUM RATINGS (stresses be ond these can permanentl damage the device)
Supply Voltage, VDD
Referenced to GND
Inputs
Referenced to GND
-0.5
Clock Output
Referenced to GND
-0.5
Ambient Operating Temperature
0
ICS512MI only
-40
Soldering Temperature
Max of 10 seconds
Storage temperature
-65
DC CHARACTERISTICS (VDD = 3.3V unless otherwise noted)
Operating Voltage, VDD
3
Input High Voltage, VIH, ICLK only
ICLK (Pin 1)
(VDD/2)+1 VDD/2
Input Low Voltage, VIL, ICLK only
ICLK (Pin 1)
VDD/2
Input High Voltage, VIH
S0, S1
VDD-0.5
Input Low Voltage, VIL
S0, S1
Output High Voltage, VOH, CMOS high
IOH=-8mA
VDD-0.4
Output High Voltage, VOH
IOH=-12mA
2.4
Output Low Voltage, VOL
IOL=12mA
IDD Operating Supply Current, 20 MHz crystal No Load, 100MHz
9
Short Circuit Current
CLK output
±70
Input Capacitance, S1, S0
Pins 6, 7
4
AC CHARACTERISTICS (VDD = 3.3V unless otherwise noted)
Input Frequency, crystal input
5
Input Frequency, clock input
2
Output Frequency, VDD = 4.5 to 5.5V
0 to +70 °C
14
Note 1
-40 to +85 °C
14
Output Frequency, VDD = 3.0 to 3.6V
0 to +70 °C
14
Note 1
-40 to +85 °C
14
Output Clock Rise Time
0.8 to 2.0V
1
Output Clock Fall Time
2.0 to 0.8V
1
Output Clock Duty Cycle
at VDD/2
45
49 to 51
Absolute Clock Period Jitter
Deviation from mean
±200
One Sigma Clock Period Jitter
80
Maximum
7
VDD+0.5
VDD+0.5
70
85
260
150
5.5
(VDD/2)-1
0.5
0.4
27
50
200
160
160
145
55
Units
V
V
V
°C
°C
°C
°C
V
V
V
V
V
V
V
V
mA
mA
pF
MHz
MHz
MHz
MHz
MHz
MHz
ns
ns
%
ps
ps
Note 1: The phase relationship between input and output clocks can change at power up. For a fixed phase relationship, see the ICS570
or the ICS527.
MDS 512 C
3
Revision 061900
Printed 11/13/00
Integrated Circuit Systems, Inc. • 525 Race Street • San Jose •CA•95126•[phone]tel • www.icst.com