ICS2402 Datasheet, PDF (3/7 Pages) Integrated Circuit Systems – Multiplier and Zero Delay Buffer

ICS2402
Multiplier and Zero Delay Buffer
External Components
The ICS2402 requires a 0.01µF decoupling capacitor to be connected between VDD and GND. It must be
connected close to the part to minimize lead inductance. No external power supply filtering is required for
this device. A 33Ω series terminating resistor can be used next to each output pin.
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the ICS2402. These ratings,
which are standard values for ICS commercially rated parts, are stress ratings only. Functional operation of
the device at these or any other conditions above those indicated in the operational sections of the
specifications is not implied. Exposure to absolute maximum rating conditions for extended periods can
affect product reliability. Electrical parameters are guaranteed only over the recommended operating
temperature range.
Item
Supply Voltage, VDD
All Inputs and Outputs
Ambient Temperature under Bias
Storage Temperature
Junction Temperature
Power Dissipation
Rating
7V
-0.5 V to VDD+0.5 V
-55 to 125°C
-65 to +150°C
125°C
0.5 W
Recommended Operation Conditions
Parameter
Ambient Operating Temperature
Power Supply Voltage (measured in respect to GND)
Power Supply Voltage (measured in respect to GND)
Min.
0
+4.5
+3.15
Typ.
+5.0
+3.3
Max.
+70
+5.5
+3.45
Units
°C
V
V
MDS 2402 D
3
Revision 122104
Integrated Circuit Systems, Inc. ● 525 Race Street, San Jose, CA 95126 ● tel [phone] ● www.icst.com