ICS844011I Datasheet, PDF (2/10 Pages) Integrated Circuit Systems – FEMTOCLOCKS™ CRYSTAL-TO- LVDS CLOCK GENERATOR

Integrated
Circuit
Systems, Inc.
PRELIMINARY
ICS844011I
FEMTOCLOCKS™CRYSTAL-TO- LVDS
CLOCK GENERATOR
TABLE 1. PIN DESCRIPTIONS
Number Name
Type
Description
1
V_DDA
Power
2
GND
Power
Analog supply pin.
Power supply ground.
3, 4
XTAL_OUT,
XTAL_IN
Input
Crystal oscillator interface. XTAL_IN is the input,
XTAL_OUT is the output.
5
OE
Input
Pullup
Output enable pin. When HIGH, Q/nQ output is active. When LOW, the Q/nQ
output is in a high impedance state. LVCMOS/LVTTL interface levels.
6, 7
nQ, Q
Output
Differential clock outputs. LVDS interface levels.
8
V_DD
Power
Core supply pin.
NOTE: Pullup refers to internal input resistors. See Table 2, Pin Characteristics, for typical values.
TABLE 2. PIN CHARACTERISTICS
Symbol
C_IN
R_PULLUP
Parameter
Input Capacitance
Input Pullup Resistor
Test Conditions
Minimum
Typical
4
51
Maximum
Units
pF
kΩ
844011AGI
www.icst.com/products/hiperclocks.html
2
REV. A JUNE 28, 2005