M660-01 Datasheet, PDF (1/3 Pages) Integrated Circuit Systems – Voltage Controlled SAW Oscillator

Integrated Circuit Systems
M660-01
Advance Information
9mm
M660-01
Voltage Controlled SAW Oscillator
DESCRIPTION
14mm
The M660-01 is a dual output (selectable output)
SAW based voltage controlled oscillator for telecom
applications. An internal SAW provides jitter
performance of less than 0.5psec (rms) over an
operating temperature of -40 to +85°C. The dual
oscillator is housed in a hermetically sealed
leadless package (LCC). Pin 2 is used as frequency
select using TTL Logic.
FEATURES
Frequency Select Feature (dual
frequency capability)
Industry Standard Package,
14 x 9 x 3.5 mm
Output Frequencies from
125-175MHz
3.3 V Operation
Low Jitter < 1.5ps rms
(50kHz to 80MHz offset range)
LVPECL Logic Levels with Fast
Transition Times
Complementary Outputs
BLOCK DIAGRAM
Control Voltage
1
Frequency Select
2
Vcc
6
4
FOUT
M660-01 ₅
Series
nFOUT
50Ω 50Ω
3
GND
Vt
Vt = Vcc-2V
APPLICATIONS
ABSOLUTE MAX RATINGS
Clock Smoothing for OC192/OC48/
OC12/OC3
Clock Smoothing for STS96/STS48/
STS12/STS3/STS1
Frequency Translation
Operating Temp. Range (Case): ........................................... -40°C to +85°C
Storage Temp. Range (Ambient): ....................................... -55°C to +125°C
Control Voltage Range: .................................................................. VEE to VCC
Output Current: ............................................................................... 20 mA
Power Supply Voltage (Vcc): ................................................... 0 to +3.6 Vdc
Clock and Data Retiming
ISO 9001
Registered
Micro Networks 324 Clark Street Worcester, MA 01606 tel: [phone] fax: [phone] www.micronetworks.com