IS61LV6416 Datasheet, PDF (3/8 Pages) Integrated Circuit Solution Inc – 64K X 16 HIGH SPEED CMOS STATIC RAM WITH 3.3 V SUPPLY

IS61LV6416
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
Symbol Parameter
VTERM Terminal Voltage with Respect to GND
TSTG Storage Temperature
PT
Power Dissipation
IOUT
DC Output Current (LOW)
Value
–0.5 to Vcc+0.5
–65 to +150
1.5
20
Unit
V
°C
W
mA
Note:
1. Stress greater than those listed under
ABSOLUTE MAXIMUM RATINGS may
cause permanent damage to the
 ^{device. This is a stress rating only and}
functional operation of the device at
these or any other conditions above
those indicated in the operational sec-
tions of this specification is not implied.
Exposure to absolute maximum rating
conditions for extended periods may
affect reliability.
OPERATING RANGE
!
Range
Ambient Temperature
Vcc
Commercial
0°C to +70°C
3.3V ± 10%
Industrial
–40°C to +85°C
3.3V ± 10%
"
DC ELECTRICAL CHARACTERISTICS (Over Operating Range)
Symbol
VOH
VOL
VIH
VIL
ILI
Parameter
Output HIGH Voltage
Output LOW Voltage
Input HIGH Voltage
Input LOW Voltage⁽¹⁾
Input Leakage
Test Conditions
VCC = Min., IOH = –4.0 mA
VCC = Min., IOL = 8.0 mA
GND ≤ VIN ≤ VCC
ILO
Output Leakage
GND ≤ VOUT ≤ VCC, Outputs Disabled
Notes:
1. VIL (min.) = –2.0V for pulse width less than 10 ns.
2. The Vcc operating range for 8 ns is 3.3V +10%, -5%.
Min.
# ^{Max. Unit}
2.4
—
V
—
2
0.4
V
VCC + 0.3 V
$
–0.3
0.8
V
Com. –2
Ind. -5
Com. –2
Ind. -5
2
5
% ^µA
2
µA
5
&
POWER SUPPLY CHARACTERISTICS⁽¹⁾ (Over Operating Range)
Symbol
ICC
ISB
Parameter
Vcc Dynamic Operating
Supply Current
TTL Standby Current
(TTL Inputs)
ISB
CMOS Standby
Current (CMOS Inputs)
Test Conditions
VCC = Max.,
IOUT = 0 mA, f = fMAX
VCC = Max.,
VIN = VIH or VIL
CE ≥ VIH , f = 0
VCC = Max.,
CE ≥ VCC – 0.2V,
VIN ≥ VCC – 0.2V, or
VIN ≤ 0.2V, f = 0
Com.
Ind.
Com.
Ind.
Com.
Ind.
-8 ns
Min. Max.
— 220
— 230
— 30
— 40
— 10
— 15
-10 ns
Min. Max.
— 200
— 210
— 30
— 40
— 10
— 15
-12 ns
Min. Max.
— 180
— 190
— 30
— 40
— 10
— 15
-15 ns
Min. Max. Unit
— 180 mA
— 190
— 30 mA
— 40
— 10 mA
— 15
Note:
1. At f = fMAX, address and data inputs are cycling at the maximum frequency, f = 0 means no input lines change.
'



Integrated Circuit Solution Inc.
3
SR013-0C