IC61C6416 Datasheet, PDF (3/10 Pages) Integrated Circuit Solution Inc – 64K X 16 HIGH-SPEED CMOS STATIC RAM

1+$+$"$
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
Symbol Parameter
VTERM Terminal Voltage with Respect to GND
TSTG Storage Temperature
PT
Power Dissipation
IOUT
DC Output Current (LOW)
Value
–0.5 to +7.0
–65 to +150
1.5
20
Unit
V
°C
W
mA
Note:
1. Stress greater than those listed under ABSO-
LUTE MAXIMUM RATINGS may cause per-
 ^{manent damage to the device. This is a stress}
rating only and functional operation of the
device at these or any other conditions above
those indicated in the operational sections of
this specification is not implied. Exposure to
absolute maximum rating conditions for ex-
tended periods may affect reliability.
OPERATING RANGE
Range
Ambient Temperature
Speed
VCC
!
Commercial
0°C to +70°C
-10, -12 5V ± 5%
-15, -20 5V ± 10%
Industrial
–40°C to +85°C
-12 5V ± 5%
-15, -20 5V ± 10%
"
DC ELECTRICAL CHARACTERISTICS (Over Operating Range)
Symbol
VOH
VOL
VIH
VIL
ILI
ILO
Parameter
Output HIGH Voltage
Output LOW Voltage
Input HIGH Voltage⁽¹⁾
Input LOW Voltage⁽²⁾
Input Leakage
Output Leakage
Test Conditions
VCC = Min., IOH = –4.0 mA
VCC = Min., IOL = 8.0 mA
GND ≤ VIN ≤ VCC
GND ≤ VOUT ≤ VCC, Outputs Disabled
Notes:
1. VIH=VCC +3.0V for pulse width less than 10ns.
2. VIL = –3.0V for pulse width less than 10 ns.
#
Min.
Max.
Unit
2.4
—
—
0.4
V
V_$
2.2 VCC + 0.5
V
–0.5
0.8
–2
2
V
% ^µA
–2
2
µA
&
POWER SUPPLY CHARACTERISTICS⁽¹⁾ (Over Operating Range)
Symbol Parameter
Test Conditions
-10
Min. Max.
-12
Min. Max.
-15
Min. Max.
-20
Min. Max. Unit
ICC
Vcc Dynamic Operating VCC = Max.,
Com. — 300 — 280 — 260 — 235 mA
Supply Current
IOUT = 0 mA, f = MAX Ind. — —
— 300 — 290 — 255
ISB
TTL Standby Current
(TTL Inputs)
VCC = Max.,
VIN = VIH or VIL
CE ≥ VIH , f = 0
Com. — 50
Ind. — —
— 50
— 55
— 50
— 55
— 50 mA
— 55
ISB
CMOS Standby
VCC = Max.,
Com. — 10
— 10
— 10
— 10 mA
Current (CMOS Inputs) CE ≥ VCC – 0.2V,
Ind. — —
— 15
— 15
— 15
VIN ≥ VCC – 0.2V, or
VIN ≤ 0.2V, f = 0
Note:
1. At f = fMAX, address and data inputs are cycling at the maximum frequency, f = 0 means no input lines change.
'



Integrated Circuit Solution Inc.
3
AHSR011-0A 05/23/2001