English
Language : 

X24C01 Datasheet, PDF (8/14 Pages) Xicor Inc. – Serial E2PROM
◁
X24C01
ABSOLUTE MAXIMUM RATINGS*
Temperature Under Bias .................. –65°C to +135°C
Storage Temperature ....................... –65°C to +150°C
Voltage on any Pin with
Respect to VSS ............................ –1.0V to +7.0V
D.C. Output Current ............................................ 5 mA
Lead Temperature (Soldering,
10 Seconds)
............................. 300°C
RECOMMENDED OPERATING CONDITIONS
Temperature
Min.
Max.
Commercial
Industrial
Military
0°C
–40°C
–55°C
70°C
+85°C
+125°C
*COMMENT
Stresses above those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device.
This is a stress rating only and the functional operation of
the device at these or any other conditions above those
indicated in the operational sections of this specification is not
implied. Exposure to absolute maximum rating conditions
for extended periods may affect device reliability.
Supply Voltage
X24C01
X24C01-3.5
X24C01-3
X24C01-2.7
Limits
4.5V to 5.5V
3.5V to 5.5V
3.0V to 5.5V
2.7V to 5.5V
D.C. OPERATING CHARACTERISTICS (Over recommended operating conditions, unless otherwise specified)
Limits
Symbol
ICC(1)
ICC(2)
I (1)
SB1
Parameter
VCC Supply Current (Read)
VCC Supply Current (Write)
VCC Standby Current
Min.
Max.
1
2
100
Units
mA
∝A
I (1)
SB2
ILI
ILO
VlL(2)
VIH(2)
VOL
VCC Standby Current
Input Leakage Current
Output Leakage Current
Input Low Voltage
Input High Voltage
Output Low Voltage
50
∝A
10
∝A
10
∝A
–1.0 VCC x 0.3 V
VCC x 0.7VCC + 0.5
V
0.4
V
CAPACITANCE TA = 25°C, f = 1.0 MHz, VCC = 5V
Test Conditions
SCL = VCC x 0.1/VCC x 0.9 Levels
@ 100 KHz, SDA = Open
SCL = SDA = VCC,
VCC = 5V ± 10%
SCL = SDA = VCC, VCC = 2.7V
VIN = GND to VCC
VOUT = GND to VCC
IOL = 2.1 mA
3837 PGM T03
Symbol
Parameter
Max. Units
Test Conditions
C (3)
I/O
CIN(3)
Input/Output Capacitance (SDA)
Input Capacitance (SCL)
Notes: (1) Must perform a stop command prior to measurement.
(2) VIL min. and VIH max. are for reference only and are not tested.
(3) This parameter is periodically sampled and not 100% tested.
8
pF
6
pF
VI/O = 0V
VIN = 0V
3837 PGM T05
8
 ▷