IC-PD3948_14 Datasheet, PDF (6/12 Pages) IC-Haus GmbH – PHASED ARRAY SINE ENCODER

iC-PD 3948
PHASED ARRAY SINE ENCODER
preliminary
Rev C1, Page 6/12
ABSOLUTE MAXIMUM RATINGS
These ratings do not imply operating conditions; functional operation is not guaranteed. Beyond these ratings device damage may occur.
Item Symbol Parameter
No.
Conditions
Min.
Unit
Max.
G001 VCC
Voltage at VCC
-0.3
6
V
G002 I(VCC) Current in VCC
-20
20
mA
G003 V()
Pin Voltage, all signal outputs
-0.3
VCC +
V
0.3
G004 I()
Pin Current, all signal outputs
-20
20
mA
G005 Vd()
G006 Tj
G007 Ts
ESD Susceptibility, all pins
Junction Temperature
Chip Storage Temperature
HBM, 100 pF discharged through 1.5 kΩ
2
kV
-40
150
◦_C
-40
150
◦_C
THERMAL DATA
Operating conditions: VCC = 4.5...5.5 V
Item Symbol
No.
T01 Ta
T02 Ts
Parameter
Conditions
Unit
Min. Typ. Max.
Operating Ambient Temperature Range package oBGA LSH2C
-40
package oQFN32-5x5
-40
(extended temperature range of -40 to 125 ^◦C
110 ^◦C
110 ^◦C
available on request)
Storage Temperature Range
package oBGA LSH2C,
package oQFN32-5x5
-40
110 ^◦C
T03 Tpk
Soldering Peak Temperature
package oBGA LSH2C
tpk < 20 s, convection reflow
tpk < 20 s, vapor phase soldering
245 ^◦C
230 ^◦C
T04 Tpk
Soldering Peak Temperature
TOL (time on label) 8 h;
Please refer to customer information file No. 7
for details.
package oQFN32-5x5
tpk < 20 s, convection reflow
tpk < 20 s, vapor phase soldering
245 ^◦C
230 ^◦C
MSL 5 A (max. floor live 24 h at 30 ^◦C and
60 % RH);
Please refer to customer information file No. 7
for details.
All voltages are referenced to ground unless otherwise stated.
All currents flowing into the device pins are positive; all currents flowing out of the device pins are negative.