IC-WG Datasheet, PDF (4/11 Pages) IC-Haus GmbH – 14-BIT DIFFERENTIAL SCANNING OPTO ENCODER

iC-WG
14-BIT DIFFERENTIAL SCANNING OPTO ENCODER
Rev B0, Page 4/11
ABSOLUTE MAXIMUM RATINGS
Values beyond which damage may occur; device operation is not guaranteed.
Item Symbol Parameter
Conditions
Fig.
G001 VCC
Supply Voltage
G301 V(A)
Voltage at Outputs A0..13
G302 I(A)
Current in Outputs A0..13
G501 I(IM1) Current in Monitor Output IM1
G601 I(TIP)
I(TIN)
Current in TIP, TIN
G701 I(RSR) Current in RSR
G702 I(RGND) Current in RGND
G703 I(LED) Current in LED
G704 I(LED Current in LED to LGND
-LGND)
G705 I(LGND) Current in LGND
G706 V(CSR) Voltage at CSR
G707 I(CSR) Current in CSR
G802 I(IPi)
I(INi)
Current in Analog Outputs
IP0, IN0, IP1, IN1
G902 I(IMP)
I(IMN)
Current in Monitor Outputs
IMP, IMN
GA01 V(NERR) Voltage at NERR
E001 Vd()
ESD Susceptibility at all Pins
TG1 Tj
TG2 Ts
Junction Temperature
Storage Temperature
V(A)< 0V or V(A)> VCC
V(LED)> VCC
LED and NERR open
LGND at GND
MIL-STD 883, Method 3015, HBM,
100pF discharged through 1.5kΩ
see package specification
Min.
0
0
-3
-1
-1
-1
-5
0
0
-3
0
-1
-1
-1
0
-30
Unit
Max.
21
V
VCC
3
mA
1
mA
1
mA
0.1
mA
5
mA
3
mA
150
mA
3
mA
VCC
1
mA
3
mA
1
mA
30
V
2
kV
125
°C
THERMAL DATA
Operating Conditions: VCC= 4.5..20V
Item Symbol Parameter
T1 Ta
Operating Ambient Temperature
Range
Conditions
see package specification
Fig.
Unit
Min. Typ. Max.
All voltages are referenced to ground unless otherwise noted.
All currents into the device pins are positive; all currents out of the device pins are negative.