IC-SD85 Datasheet, PDF (4/5 Pages) IC-Haus GmbH – Infrared LED

iC-SD85 oLGA SD2C-2
Infrared LED
Item Parameter
Substrate and Alignment Holes
A1 Outline X
A2 Outline Y
A4 Hole Diameter
A5 Hole Diameter 2
A6 Hole Distance
Reference
B1 Outline vs. Reference X
B2 Outline vs. Reference Y
Cover Size and Shape
C1 Cover Size X
C2 Cover Size Y
C3 Cover Thickness
C4 Distance Hole vs. Glass Edge
Chip Placement
H1 Chip Position vs. Reference X
H2 Chip Position vs. Reference Y
Bottom Metal Pattern
J11 Lead Pitch X
J12 Lead Size X
J13 Lead Size Y
Thickness Specifications
T1 Overall Thickness
A3 Substrate Thickness
Comments
metal-top to cover-surface
bottom package to metal-top
(snap-fit area)
Rev A2, Page 4/5
Unit
Min. Typ. Max. Tolerance
8.0
±0.1
mm
5.0
±0.1
mm
0.6
+0.05
mm
0.8
+0.05
mm
6.15
±0.05
mm
0.925
2.11
±0.15
mm
±0.15
mm
4.2
mm
3.7
mm
0.6
1.15
mm
0.825
mm
3.075
0.39
±0.125
mm
±0.125
mm
2.54
±0.03
mm
1.0
±0.03
mm
3.8
±0.03
mm
1.15
1.85
mm
0.55
0.7
mm
iC-Haus expressly reserves the right to change its products and/or specifications. An Infoletter gives details as to any amendments and additions made to the
relevant current specifications on our internet website www.ichaus.de/infoletter; this letter is generated automatically and shall be sent to registered users by
email.
Copying – even as an excerpt – is only permitted with iC-Haus approval in writing and precise reference to source.
iC-Haus does not warrant the accuracy, completeness or timeliness of the specification on this site and does not assume liability for any errors or omissions
in the materials. The data specified is intended solely for the purpose of product description. No representations or warranties, either express or implied, of
merchantability, fitness for a particular purpose or of any other nature are made hereunder with respect to information/specification or the products to which
information refers and no guarantee with respect to compliance to the intended use is given. In particular, this also applies to the stated possible applications or
areas of applications of the product.
iC-Haus conveys no patent, copyright, mask work right or other trade mark right to this product. iC-Haus assumes no liability for any patent and/or other trade
mark rights of a third party resulting from processing or handling of the product and/or any other use of the product.
As a general rule our developments, IPs, principle circuitry and range of Integrated Circuits are suitable and specifically designed for appropriate use in technical
applications, such as in devices, systems and any kind of technical equipment, in so far as they do not infringe existing patent rights. In principle the range of
use is limitless in a technical sense and refers to the products listed in the inventory of goods compiled for the 2008 and following export trade statistics issued
annually by the Bureau of Statistics in Wiesbaden, for example, or to any product in the product catalogue published for the 2007 and following exhibitions in
Hanover (Hannover-Messe).
We understand suitable application of our published designs to be state-of-the-art technology which can no longer be classed as inventive under the stipulations
of patent law. Our explicit application notes are to be treated only as mere examples of the many possible and extremely advantageous uses our products can
be put to.