IC-PN2656_10 Datasheet, PDF (4/7 Pages) IC-Haus GmbH – PHASED ARRAY NONIUS ENCODER 26-256

iC-PN2656
preliminary
PHASED ARRAY NONIUS ENCODER 26-256
Rev B2, Page 4/7
ABSOLUTE MAXIMUM RATINGS
These ratings do not imply operating conditions; functional operation is not guaranteed. Beyond these ratings device damage may occur.
Item Symbol Parameter
No.
Conditions
Min.
Unit
Max.
G001 VCC
Voltage at VCC
-0.3
6
V
G002 I(VCC) Current in VCC
-20
20
mA
G003 V()
Pin Voltage, all signal outputs
-0.3
VCC +
V
0.3
G004 I()
Pin Current, all signal outputs
-20
20
mA
G005 Vd()
ESD Susceptibility, all pins
HBM, 100 pF discharged through 1.5 kΩ
2
kV
G006 Tj
Junction Temperature
-40
150
°C
G007 Ts
Chip Storage Temperature
-40
150
°C
THERMAL DATA
Item Symbol
No.
T01 Ta
T02 Ts
T03 Tpk
T04 Tpk
Parameter
Conditions
Operating Ambient Temperature Range package oBGA LSH2C
package oQFN32-5x5*
Unit
Min. Typ. Max.
-40
110 °C
-40
110 °C
Storage Temperature Range
Soldering Peak Temperature
(extended temperature range on request)
package oBGA LSH2C,
-40
package oQFN32-5x5*
package oBGA LSH2C
110 °C
tpk < 20 s, convection reflow
tpk < 20 s, vapor phase soldering
245 °C
230 °C
Soldering Peak Temperature
TOL (time on label) 8 h;
Please refer to customer information file No. 7
for details.
package oQFN32-5x5*
tpk < 20 s, convection reflow
tpk < 20 s, vapor phase soldering
245 °C
230 °C
MSL 5A (max. floor live 24 h at 30 °C and
60 % RH);
Please refer to customer information file No. 7
for details.
*) Package qualification pending.
All voltages are referenced to ground unless otherwise stated.
All currents flowing into the device pins are positive; all currents flowing out of the device pins are negative.