IC-GE100_15 Datasheet, PDF (4/12 Pages) IC-Haus GmbH – PWM RELAY/SOLENOID DRIVER

iC-GE100
PWM RELAY/SOLENOID DRIVER
preliminary
Rev B1, Page 4/12
ABSOLUTE MAXIMUM RATINGS
Beyond these values damage may occur; device operation is not guaranteed.
Item Symbol Parameter
No.
Conditions
G001 V(VB)
Voltage at VB
G002 I(VB)
Current in VB
G003 V(SW) Voltage at OUT
G004 I(SW)
Output Current in OUT
G005 V(DIAG) Voltage at LED
G006 I(DIAG) Current in LED
G007 V(IACT) Voltage at ISET
G008 I(IACT) Current in ISET
G009 V(IHOLD) Voltage at IHOLD
G010 I(IHOLD) Current in IHOLd
G011 V(EN)
Voltage at IN
G012 I(EN)
Current in IN
G013 V(SYNC) Voltage at SYNC
G014 I(SYNC) Current in SYNC
G015 VD()
Susceptibility to ESD at all pins
HBM 100 pf discharged through 1.5 kΩ
G016 Tj
Junction Temperature
G017 Ts
Storage Temperature
Min.
-0.3
-100
-0.3
-6
-0.3
-6
-0.3
-6
-0.3
-6
-0.3
-6
-6
-6
-40
-40
Unit
Max.
37
V
6
mA
53
V
100
mA
37
V
8
mA
7
V
6
mA
7
V
6
mA
37
V
6
mA
37
V
6
mA
2
kV
150
°C
150
°C
THERMAL DATA
Operating Conditions: VB = 10...36 V, LSW = 0.01...10 H, RACT = 6.2 k...62 kΩ, RHOLD = 6.2 k...62 kΩ
Item Symbol Parameter
No.
Conditions
Unit
Min. Typ. Max.
T01 Ta
Operating Ambient Temperature Range
-40
85 °C
T02 Rthja
Thermal Resistance Chip/Ambient
surface mounted, thermal pad soldered to ca.
2 cm² heat sink
30 40 K/W
All voltages are referenced to ground unless otherwise stated.
All currents flowing into the device pins are positive; all currents flowing out of the device pins are negative.