IC-WKP Datasheet, PDF (3/10 Pages) IC-Haus GmbH – 15 V CW P-TYPE LASER DIODE DRIVER

iC-WKP
15 V CW P-TYPE LASER DIODE DRIVER
PACKAGES SO8tp, DFN10 4 mm x 4 mm to JEDEC standard
Rev A6, Page 3/10
PIN CONFIGURATION SO8tp
1
CI
2
GND
3
AGND
4
MDK
8
LDA
7
VCC
6
VCCA
5
MDA
PIN FUNCTIONS
No. Name Function
1 CI Capacitor for Power Control
2 GND Ground
3 AGND Reference Ground for CI
4 MDK APC Setup,
Monitor Input 1 (MD Cathode)
5 MDA Monitor Input 2
(MD Anode, modulation)
6 VCCA Driver Supply
7 VCC +3 to +15 V Supply Voltage
8 LDA Driver Output (LD Anode)
PIN CONFIGURATION DFN10 4 mm x 4 mm
iC−WKP
...
...yyww
PIN FUNCTIONS
No. Name Function
1 CI Capacitor for Power Control
2 GND Ground
3 AGND Reference Ground for CI
4 MDK APC Setup,
Monitor Input 1 (MD Cathode)
5 n.c.
6 MDA Monitor Input 2
(MD Anode, modulation)
7 VCCA Driver Supply
8 VCC +3 to +15 V Supply Voltage
9 LDA Driver Output (LD Anode)
10 n.c.
The Thermal Pad is to be connected to a Ground Plane on the PCB. Do not short-circuit pins AGND and
GND as this may affect the precision of the regulator and interfere with the soft start!