IC-WKM_15 Datasheet, PDF (3/12 Pages) IC-Haus GmbH – M-TYPE CW LASER DIODE DRIVER

iC-WKM
M-TYPE CW LASER DIODE DRIVER
PACKAGING INFORMATION SO8-TP, DFN10 4 mm x 4 mm to JEDEC standard
Rev C2, Page 3/12
PIN CONFIGURATION SO8-TP
8765
<P-CODE>
<P-CODE>
<A-CODE>
PIN FUNCTIONS
No. Name Function
1 CI Capacitor for Power Control
2 GND Ground
3 AGND Reference Ground for CI, RM
4 MDK Monitor Input 2
(MD Cathode, modulation)
5 MDA APC Setup, Monitor Input 1
(MD Anode)
6 VCCA Driver Supply
7 VCC +3.6 to 15 V Supply Voltage
8 LDA Driver Output (LD Anode)
1 234
The Thermal Pad is to be connected to a Ground Plane on the PCB. Do not short-circuit pins AGND and GND, for
this may deteriorate the precision of the regulator and interfere with the soft-start!
PIN CONFIGURATION DFN10 4 mm x 4 mm
1
10
2
<P-CODE>
9
3
<A-CODE>
8
4
<D-CODE>
7
5
6
PIN FUNCTIONS
No. Name Function
1 CI Capacitor for Power Control
2 GND Ground
3 AGND Reference Ground for CI, RM
4 MDK Monitor Input 2
(MD Cathode, modulation)
5 n.c.
6 MDA APC Setup, Monitor Input 1
(MD Anode)
7 VCCA Driver Supply
8 VCC +3.6 to 15 V Supply Voltage
9 LDA Driver Output (LD Anode)
10 n.c.
The Thermal Pad is to be connected to a Ground Plane on the PCB. Do not short-circuit pins AGND and GND, for
this may deteriorate the precision of the regulator and interfere with the soft-start!