IC-OG_12 Datasheet, PDF (3/10 Pages) IC-Haus GmbH – 8-BIT DIFFERENTIAL SCANNING OPTO ENCODER

iC-OG
preliminary
8-BIT DIFFERENTIAL SCANNING OPTO ENCODER
PIN CONFIGURATION BLCC OGC
9.5 mm x 8.2 mm x 1.8 mm; lead pitch 0.8 mm;
A package datasheet is available separately.
Rev D1, Page 3/10
PIN FUNCTIONS
No. Name Function
1 CSR External capacitor for LED control
2 NI0 Track 0 Analog Push-Pull Output
3 NI1 Track 1 Analog Push-Pull Output
4 NI2 Track 2 Analog Push-Pull Output
5 LED LED Driver Output
6 AGND Reference Ground for ISET and CSR
Circuitry
7 ISET LED Current Control Setup
8 TIN Negative Test Aid Input
9 TIP Positive Test Aid Input
10 NER Error Message Output, low active
11 GND Ground
12 S7 Track 7 Push-Pull Output
13 S6 Track 6 Push-Pull Output
14 S5 Track 5 Push-Pull Output
15 S4 Track 4 Push-Pull Output
16 S3 Track 3 Push-Pull Output
17 S2 Track 2 Push-Pull Output
18 S1 Track 1 Push-Pull Output
19 S0 Track 0 Push-Pull Output
20 VCC +5 V Supply Voltage
PIN CONFIGURATION oQFN38-7x5
7.0 mm x 5.0 mm x 0.9 mm; lead pitch 0.5 mm; in qualification;
PIN FUNCTIONS
No. Name Function
1...7 n.c.
8 VCC +5 V Supply Voltage
9 CSR External capacitor for LED control
10 NI0 Track 0 Analog Push-Pull Output
11 NI1 Track 1 Analog Push-Pull Output
12 NI2 Track 2 Analog Push-Pull Output
PIN FUNCTIONS
No. Name Function
13 LED LED Driver Output
14 AGND Reference Ground for ISET and CSR
Circuitry
15 ISET LED Current Control Setup
16 TIN Negative Test Aid Input
17 TIP Positive Test Aid Input
18 NER Error Message Output, low active
19 GND Ground
20...26 n.c.
27 S7 Track 7 Push-Pull Output
28 S6 Track 6 Push-Pull Output
29 n.c.
30 S5 Track 5 Push-Pull Output
31 n.c.
32 S4 Track 4 Push-Pull Output
33 n.c.
34 S3 Track 3 Push-Pull Output
35 n.c.
36 S2 Track 2 Push-Pull Output
37 S1 Track 1 Push-Pull Output
38 S0 Track 0 Push-Pull Output
n.c. Pin not connected.