IC-MZ Datasheet, PDF (3/11 Pages) IC-Haus GmbH – DIFFERENTIAL HALL SWITCH

iC-MZ
DIFFERENTIAL HALL SWITCH
Rev A2, Page 3/11
ABSOLUTE MAXIMUM RATINGS
Beyond these values damage may occur; device operation is not guaranteed. Absolute Maximum Ratings are no Operating Conditions.
Integrated circuits with system interfaces, e.g. via cable accessible pins (I/O pins, line drivers) are per principle endangered by injected
interferences, which may compromise the function or durability. The robustness of the devices has to be verified by the user during system
development with regards to applying standards and ensured where necessary by additional protective circuitry. By the manufacturer
suggested protective circuitry is for information only and given without responsibility and has to be verified within the actual system with
respect to actual interferences.
Item Symbol
No.
G001 VB
G002 V()
G003 V()
G004 I(VB)
G005 I()
G006 I(NERR)
G007 I()
G008 Vd()
G009 Tj
G010 Ts
Parameter
Supply Voltage
Voltage at D, ND, NERR
Voltage at A, NA, TEST
Current in VB
Current in D, ND
Current in NERR
Current in A, NA, TEST
Susceptibility to ESD at all pins
Operating Junction Temperature
Storage Temperature Range
Conditions
HBM 100 pF discharged through 1.5 kΩ
Min.
-0.4
-0.4
-0.4
-100
-600
-10
-4
-40
-40
Unit
Max.
40
V
40
V
6
V
100
mA
600
mA
30
mA
4
mA
1
kV
150
°C
150
°C
THERMAL DATA
Operating Conditions: VB = 4.5..36 V, unless otherwise stated
Item Symbol Parameter
No.
Conditions
T01 Ta
Operating Ambient Temperature Range
T02 Rtjc
T03 Rthja
Thermal Resistance Chip/Case
Thermal Resistance Chip/Ambient
Mounted on PCB, with thermal pad of 2 cm²
Unit
Min. Typ. Max.
-40
+125 °C
10
K/W
40
K/W
All voltages are referenced to ground unless otherwise stated.
All currents flowing into the device pins are positive; all currents flowing out of the device pins are negative.