IC-HD7 Datasheet, PDF (3/8 Pages) IC-Haus GmbH – QUAD DIFFERENTIAL LINE DRIVER

iC-HD7
QUAD DIFFERENTIAL LINE DRIVER
Rev A5, Page 3/8
ABSOLUTE MAXIMUM RATINGS
Beyond these values damage may occur; device operation is not guaranteed. Absolute Maximum Ratings are no Operating Conditions.
Integrated circuits with system interfaces, e.g. via cable accessible pins (I/O pins, line drivers) are per principle endangered by injected
interferences, which may compromise the function or durability. The robustness of the devices has to be verified by the user during system
development with regards to applying standards and ensured where necessary by additional protective circuitry. By the manufacturer
suggested protective circuitry is for information only and given without responsibility and has to be verified within the actual system with
respect to actual interferences.
Item Symbol
No.
G001 VB
G002 Vin()
G003 Vin()
G004 V()
G005 I()
G006 Vd()
G007 Tj
G008 Ts
Parameter
Conditions
Supply Voltage VB
Voltage at Inputs I1...I4
Voltage at Input NEN
Voltage at Outputs O1...O4, NO1...NO4
Current in Outputs O1...O4, NO1...NO4
ESD Susceptibility at all pins
HBM, 100 pF discharged through 1.5 kΩ
Junction Temperature
Storage Temperature
Min.
0
0
0
0
-500
-40
-40
Unit
Max.
40
V
VB
V
VB
V
VB
V
500
mA
2
kV
150
°C
150
°C
THERMAL DATA
Item Symbol
No.
T01 Ta
T02 Rthja
Parameter
Conditions
Unit
Min. Typ. Max.
Operating Ambient Temperature
(extended range to -40°C on request)
-25
125 °C
Thermal Resistance Chip To Ambient SO16N surface mounted, no special heat sink
110
K/W
All voltages are referenced to ground unless otherwise stated.
All currents flowing into the device pins are positive; all currents flowing out of the device pins are negative.