MB3A Datasheet, PDF (2/2 Pages) IC-Haus GmbH – BiSS to PC-LPT ADAPTER

MB3A
BiSS to PC-LPT ADAPTER
PC Plug Pin Configuration J1 (25-pole SUB-D)
Pin LPT Name
1 nStrobe
2 Data0
... ...
9 Data7
10 nAck
11 Busy
12 PaperOut
13 Select
14 LineFeed
15 nError
16 nInitialize
17 nSelect
18 GND
... ...
25 GND
Signal
ALE
n/a
...
n/a
n/a
DB1-SO
EOT
NER
DB0-SI
n/a
NCS
n/a
GND
...
GND
Function
Address latch enable Input
SPI data output
End-of-transmission output
Error message (active low)
SPI data input
Chip select input
Ground
...
Ground
Wiring circuit
Release A1, Page 2/2
Fig. 1: MB3A schematic diagram. Jumper JP3_2 can be removed to enable single-ended SL line communication.
(U3 is not assembled).
This specification is for a newly developed product. iC-Haus therefore reserves the right to change or update, without notice, any information contained herein, design and specification;
and to discontinue or limit production or distribution of any product versions. Please contact iC-Haus to ascertain the current data.
Copying - even as an excerpt - is only permitted with iC-Haus approval in writing and precise reference to source.
iC-Haus does not warrant the accuracy, completeness or timeliness of the specification on this site and does not assume liability for any errors or omissions in the materials. The data
specified is intended solely for the purpose of product description. No representations or warranties, either express or implied, of merchantability, fitness for a particular purpose or of any
other nature are made hereunder with respect to information/specification or the products to which information refers and no guarantee with respect to compliance to the intended use is
given. In particular, this also applies to the stated possible applications or areas of applications of the product.
iC-Haus conveys no patent, copyright, mask work right or other trade mark right to this product. iC-Haus assumes no liability for any patent and/or other trade mark rights of a third party
resulting from processing or handling of the product and/or any other use of the product.